Welcome, Guest. Please login or register.
Did you miss your activation email?
February 09, 2010, 07:15:52 AM

Login with username, password and session length
Search:    
Having problems registering?  Please check your junk e-mail settings and junk e-mail folders for any confirmation e-mails.
1361699 Posts in 80662 Topics by 10520 Members
Latest Member: kmart888

* Home Forum Chat Gallery Help Search Calendar Login Register

SoCalEvo.net  >  Evo 8/9 Forums  >  Evo 8/9 Troubleshooting, DIY and Install HELP  >  Topic: NEED HELP INSTALLING CAMS 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: NEED HELP INSTALLING CAMS  (Read 544 times) Bookmark and Share
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
NEED HELP INSTALLING CAMS
« on: June 18, 2009, 08:11:30 PM »

i need help installing my kelford 272s. where should the white markings on the cam gears be facing before removing them? please direct me in the right direction thanks in advanced for the help guys
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
Massimo Power
Awesome - O
SoCalEvo.net Vendor
Evo Specialist
*
Offline Offline

Joined: Jul 2008

Cars: Lancer Evo 8


For Inquiries: mauricio@massimopower.com

Personal Gallery


View Profile WWW
Re: NEED HELP INSTALLING CAMS
« Reply #1 on: June 18, 2009, 08:11:55 PM »

up and make sure you set the motor to tdc just incase...
Logged

D-Sport Magazine Editor's Choise Award Winner

www.massimopower.com
Special Thanx To:
www.aeperformance.com
www.jlbmotorsports.com
www.domospeed.com/blog/
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #2 on: June 18, 2009, 08:25:53 PM »

thanks a lot i really appriciate the help. wat other things are good to know?
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #3 on: June 18, 2009, 08:28:02 PM »

do i have to bleed the lifters?
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
Massimo Power
Awesome - O
SoCalEvo.net Vendor
Evo Specialist
*
Offline Offline

Joined: Jul 2008

Cars: Lancer Evo 8


For Inquiries: mauricio@massimopower.com

Personal Gallery


View Profile WWW
Re: NEED HELP INSTALLING CAMS
« Reply #4 on: June 18, 2009, 08:29:15 PM »

nah you shouldnt have to... just make sure you have all the torque specs handy and turn the motor fully about 6-10 times or so by hand before starting the car up...
Logged

D-Sport Magazine Editor's Choise Award Winner

www.massimopower.com
Special Thanx To:
www.aeperformance.com
www.jlbmotorsports.com
www.domospeed.com/blog/
jbenosa
Experienced Member
**
Offline Offline

Joined: Sep 2007

Cars: 2003 Evo 8


Lakers All The Way!

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #5 on: June 18, 2009, 08:33:14 PM »

Mauricio @ Massimo Power is awesome, helpful and very knowledgable!
Logged
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #6 on: June 18, 2009, 08:52:39 PM »

yup he sure is thanks a lot mauricio
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
pikadosboy
Niño de champa.
Evolved
***
Offline Offline

Joined: Oct 2007

Cars:


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #7 on: June 19, 2009, 12:28:52 AM »

yup he sure is thanks a lot mauricio
i hope you know what youre doing if not.....   Kaboom, gl installing those bad boys.
Logged
turbolarry
Evo Specialist
*****
Offline Offline

Joined: Nov 2004

Cars: 04 RS


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #8 on: June 19, 2009, 09:53:29 AM »

Logged

If it doesn't make power, it's not worth the hour.
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #9 on: June 19, 2009, 08:01:18 PM »

is the mivec cam gear supose to be loose on the cam?
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #10 on: June 19, 2009, 08:40:59 PM »

need some help guys
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
Skiracer
Skifailure
Evo Guru
*****
Offline Offline

Joined: Jul 2004

Cars: GG IX with mudflaps!


Official SoCalEvo Skibum

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #11 on: June 19, 2009, 08:44:36 PM »

Logged

Mod list: Rally Amror Mudflaps, rubber floormats, camping shovel, ice scraper, snowtires, Thule ski rack, RRE Stage 1E, E85 AltMap switch tune
http://www.socalevo.net/index.php?option=com_smf&Itemid=37&topic=54164.0


*** JOIN EVOMODDERS.COM JOIN ***
Graphic/Interior Design,Branding & Identities, Invitations www.nomadic-nomads.com
pikadosboy
Niño de champa.
Evolved
***
Offline Offline

Joined: Oct 2007

Cars:


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #12 on: June 19, 2009, 10:37:48 PM »

is the mivec cam gear supose to be loose on the cam?
no! omg.
Logged
Evolutionized
Evo Specialist
*****
Offline Offline

Joined: Nov 2006

Cars: Apex Silver IX SE, 08 Jeep SRT-8, 07 BMW M5, 07 CBR600RR


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #13 on: June 19, 2009, 10:56:07 PM »

GL
Logged

Call the coroner! There's gonna be a lot of slow singin , and flower bringin if my Evo's alarm starts ringin

I never chuck a deuce to a X owner...because I'm not sure if it's a Lexus, Mazda, or a Toyota... So I give them the finger!
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #14 on: June 19, 2009, 11:10:29 PM »

how the f do i fix that?
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
pikadosboy
Niño de champa.
Evolved
***
Offline Offline

Joined: Oct 2007

Cars:


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #15 on: June 19, 2009, 11:15:57 PM »

have some that know how to install cams fix it!
Logged
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #16 on: June 19, 2009, 11:20:53 PM »

good idea but idk anyone that knows how to do it
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
Enzo
Not So Newbie
*
Offline Offline

Joined: Jun 2009

Cars: 06' GangsterGrey IX GSR that will smoke yo ass!


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #17 on: June 19, 2009, 11:24:12 PM »

how the f do i fix that?
You should have just paid to have them installed bro. If u have any more troubles, don't be afraid to drop a pm
Logged

Evolutionized
Evo Specialist
*****
Offline Offline

Joined: Nov 2006

Cars: Apex Silver IX SE, 08 Jeep SRT-8, 07 BMW M5, 07 CBR600RR


Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #18 on: June 19, 2009, 11:30:13 PM »

^^ this guy joined today and already helpin out

haha
Logged

Call the coroner! There's gonna be a lot of slow singin , and flower bringin if my Evo's alarm starts ringin

I never chuck a deuce to a X owner...because I'm not sure if it's a Lexus, Mazda, or a Toyota... So I give them the finger!
MRevil9
Evolved
***
Offline Offline

Joined: Jan 2009

Cars: 06 Evo IX MR


LAKERS+KOBE=THE 2008-2009 NBA CHAMPS *LAKERS BABY*

Personal Gallery


View Profile
Re: NEED HELP INSTALLING CAMS
« Reply #19 on: June 19, 2009, 11:33:39 PM »

yea thats one of the reasons y i love socalevo. for sure thanks enzo
Logged

Evo IX MR, 415hp n 347 lb ft at 24psi n 91 octane Looney Tuned, Injen uicp with intake, TiAL 50mm bov, AMS licp, JIC FULL TITANIUM EXHAUST, Greddy profec b-spec 2 ebc, Shearer Fabrications BB 50 trim turbo kit with a TiAL 38mm wg, Kelford 272 cams, RC 1000cc injectors, Walbro FP, ARP Head Studs
Pages: [1] 2 Go Up Print 
SoCalEvo.net  >  Evo 8/9 Forums  >  Evo 8/9 Troubleshooting, DIY and Install HELP  >  Topic: NEED HELP INSTALLING CAMS « previous next »
Jump to:  

Contact Us - Advertise - RSS