PDA

View Full Version : Greddy Type S BOV = Non Un Recirc?



Muramasa
04-12-2004, 12:55 AM
I apologize to everyone for asking so many questions regarding the Greddy TYpe S BOV. BUt I was bored and I tried not recirculating it and my idle kept popping from almost stall to 1k rpm. Has anyone sucessfully not recirculated the greddy type S BOV?? :?:

Coolguy949
04-12-2004, 01:10 AM
make sure the valve adjustment screw is tight enough so there's no VAC leaks at idle. If you've taken the small spring out, the valve has a tendancy to leak a little at idle unless you crank the adjustment screw in almost all the way.