To fit 275s, roll FRONT fenders too?

[EVO8LTW]

In order to run 275s or 285s, do you need to roll the front fender lips? I'm planning to run 275 40 17s on some 17x9s with -3 camber front camber and about -1.6 rear camber (for autocross). I'm hoping that I only need to roll the rears. I've got the fender roller now but I need to return it soon, so I have to make some decisions!

Thanks.

[robi]

I just "pulled" the fenders out.

[EVO8LTW]

I just "pulled" the fenders out.

How does one "pull" fenders???

[Smogrunner]

Knowing Robi, he just grabbed the front fender with his hands, leaned back and pulled until there was clearance. Free upgrades such as this do not fit my budget. I usually find the most expensive way to do something. LOL

[gt40]

I just "pulled" the fenders out.

I had to beat mine like a red headed step child...

[GokuSSJ4]

how about for 255/40/17 do you need to roll the front fenders ???

[trinydex]

dun think so goku... 255 will fit in the back all tucked in a lowered with just rolling so fronts should be more than fine.

[GokuSSJ4]

dun think so goku... 255 will fit in the back all tucked in a lowered with just rolling so fronts should be more than fine.

it depends what type of rims and off set you have as well as suspension. The suspension that i have along with the rims which are 17x8.5 +40 off set fit nice but clearance is barly there. To be safe i had the rears fenders roll to have enough clearance (since before rolling it was less then an inch)

[robi]

Knowing Robi, he just grabbed the front fender with his hands, leaned back and pulled until there was clearance. Free upgrades such as this do not fit my budget. I usually find the most expensive way to do something. LOL

pretty close to the truth...the fronts have MUCH more clearance than the rears I'm currently running a 9.5" rim and with the wheel adapters to widen the front end for suspension clearance I'm rumnning an efective offset of +18....and need the wider carbon fenders to clear...

[gt40]

I rubbed my 275's in the front a bit. Beat them and finally just cut out the offending parts of the wheel well...