PDA

View Full Version : 2003 Factory Alignment Specs ??



RaysurX
01-23-2005, 09:47 PM
Need some help "OL Knowledgable Ones".....

Posting in GENERAL pages for more responses... sorry Goku if in wrong forum.... move as needed.

Doing a little research....
Need factory specs and thresholds for reference.... checked manual... nothing.

No.. I am not going to try to MacGyver my own settings with a crowbar, torch, chewing gum and a paperclip.

Can anyone that has FACTORY settings / nominal thresholds please share the info....

Thank you in advance guys.... and (new) gals...if you really are girls...lol

Front Left
Camber = ??
Caster= ??
Toe=

Front Right
Camber= ??
Caster=
toe=

Front Together
Cross Camber=
Cross Caster =
Total Toe =

Rear Left
Camber =
Toe=

Rear Right
Camber =
Toe =

Total Rear
Cross Caster =
Total Toe =
Thrust Angle =

trannb
01-24-2005, 02:14 AM
From the Shop Manual:

Front Wheel
Toe-In Standard Value: 0 +/- 2mm (0 +/- 0.08 inch)
Camber Standard Value: -1*00' +/- 30' or -2*00' +/- 30'
Caster Standard Value: 3*55' +/- 30'
Kingpin Inclination Standard Value: 13*45' +/- 1*30'

Note 1: difference between left and right wheels must be less than 30'
Note 2: Caster and Kingpin Inclination are preset at the factory and cannot be adjusted.

Rear Wheel
Toe-In Standard Value: 3 +/- 2mm (0.12 +/- 0.07 inch)
Camber Standard Value: -1*00' +/- 30'

Note 1: difference between left and right wheels must be less than 30'