PDA

View Full Version : HOW TO: cut undertray for intercooler



trinydex
10-26-2006, 10:06 PM
The under tray did not fit without modification.Â* I did manage to get it to fit, very well with only slight modification.Â* All you need is phillips head screwdriver, cutting wheel(Dremmel), razor blade, zip ties and a drill.

I did not want to have the undertray off, nor did I want it flapping in the wind.Â* By cutting it where I did, you maintain the meteaal screws that give the undertray stability, and you also have access to the tow hook.

Admins- If you need a step-by-step written for the intercooler/battery/pipes/undertray... just let me know.

here are the pics-

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_12aadb21.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_113c782e.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_0182faa2.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_8af0c028.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/mURI_temp_93c75bba.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_7da1735b.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/mURI_temp_6f396779.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/mURI_temp_9a2e207f.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_mURI_temp_b60fdc48.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/mURI_temp_241a0332.jpg

tatsuIX
03-09-2009, 08:48 AM
will this method have any effect with the rubber Lip that attaches to the front of the under tray?

tatsuIX
03-09-2009, 08:49 AM
Great write up!!!

littlejap33
03-10-2009, 08:05 PM
nice!! i need this hahah