PDA

View Full Version : My logs using the Innovate Motorsports LC-1, LMA-3, OBD-II cable, & LogWorks2



alan678
01-29-2007, 07:36 PM
Any tuner heads out there???

After many hours of road tuning my own car after my initial Jestr M1 flash i must say that i am even happier with the way my car is performing...all the below is on 91 oct....yes....91, i know it sucks...at first i had an issue with the stock solenoid so i went with the slowboy racing MBC, then i had an issue with my boost gauge reading EXTREMELY FALSE numbers (like a 4 lbs difference, dang autometer gauge) so i went ahead and purchased the Innovate Motorsports LMA-3 and tuned out the rest of the car myself...

Below is my datalog doing 18lbs @ 3500rpms, peak boost of 24lbs @ 4000rpms tapering to 18 @ 7500rpms using the LMA-3 3-Bar Map sensor....i do have an LC-1 but i am waiting for the serial link cable to log both, so i can only log boost or AFRs using the Open port plug-in with the OBD-II plug...

http://i77.photobucket.com/albums/j52/alan_678/3rdgearpull.jpg

Here are my AFRs....ranging from 11.55 @ 3500rpms to 11.32 @ 7300rpms

http://i77.photobucket.com/albums/j52/alan_678/NewPicture6.jpg

Chime in and let me know what more can be done or what do yall think!
Thanks for looking!

and btw....my mods are below...

-Jestr Tuning M1 Flash
-K&N Drop-in Air Filter
-Greddy V-Spec Intercooler
-Horsepower freaks Lower Intercooler Pipe
-APS Dual Vent Blow off valve
-AMS 3" (Catted) Turbo Back Exhaust
-Walbro 255lph fuel pump
-HKS 272i/272e Camshafts
-[forum-restricted] Cam Gears (-3i/-3e)
-ARP Headstuds

turbolarry
01-30-2007, 11:59 AM
Can you define some of that data? What are those 100%'s; throttle and IDC? I'm assuming that's ignition timing too and it seems pretty low. It even pulls timing to 0* at 5900 RPM's in the last one. :-o It's easier to look at the data if it's in the form of a spread sheet or a simple chart.