Sr20kidD
05-03-2007, 09:12 AM
This is the short version.Â* When I searched I found a lot of info for the VIII's but not the IX's.Â* Alot of the info wasnt confirmed either.
Using the MT-6 HKS Harness is pretty much straight forward intall on the steering column.Â* The grey wire from the TT is going to the parking brake Blue/Red wire.
The RPM signal and the Speed Signal wires from the timer are connected like so on the ECU
First is the RPM SignalÂ* Brown Wire from the TT goes in the brown/green wire on the ECUÂ* like Pic 1
This is the Middle Harness
http://img.photobucket.com/albums/v516/dizkokidd/IMG_2679.jpg
Now the Speed wire Blue Wire from the TT goes to the black/yellow wire on the harnessÂ* like pic 2
This is the first harness from left to right
http://img.photobucket.com/albums/v516/dizkokidd/IMG_2677.jpg
last but not least a Thanks to Sam @ SRT for the TT and the Harness...
Using the MT-6 HKS Harness is pretty much straight forward intall on the steering column.Â* The grey wire from the TT is going to the parking brake Blue/Red wire.
The RPM signal and the Speed Signal wires from the timer are connected like so on the ECU
First is the RPM SignalÂ* Brown Wire from the TT goes in the brown/green wire on the ECUÂ* like Pic 1
This is the Middle Harness
http://img.photobucket.com/albums/v516/dizkokidd/IMG_2679.jpg
Now the Speed wire Blue Wire from the TT goes to the black/yellow wire on the harnessÂ* like pic 2
This is the first harness from left to right
http://img.photobucket.com/albums/v516/dizkokidd/IMG_2677.jpg
last but not least a Thanks to Sam @ SRT for the TT and the Harness...