I need another appt.

[vortech_g35]

Hey Guys,

I need another appointment for a install of the following:

AMS VSR Intake
Works Aperture II TB
880cc Injectors
Re-tune on 91 and Race Gas

I contacted Alfred already about a custom UICP, so I would like to make the appointment last week of May or First week of June. If you need a deposit on the UICP, please just contact me. Thanks alot! Lets pray for good results!!! Also if you guys could order me a Fuel Pressure Regulator or tell me what I could get. I found a Aeromotive FPR, but I don't know the supporting mods to get also. Thanks

Andrew

[TeKiZeRo]

You or Dan should give me another ride after it gets re-tuned >:]

[vortech_g35]

It's gonna cost you....

[TeKiZeRo]

I'll give you a dollar!

[vortech_g35]

I don't know what it is, but maybe I have to push up my appt. My car seems to be running funny, so PLEASE HURRY UP ON THE PIPING!!

[MR. Birdie]

hahah, i'm also waiting for custom pipping for my VSR manifold.

[Evo8you]

I don't know what it is, but maybe I have to push up my appt. My car seems to be running funny, so PLEASE HURRY UP ON THE PIPING!!


hahah, i'm also waiting for custom pipping for my VSR manifold.

As soon as I here something I will let you know. See you later!

[vortech_g35]

damn birdie! Maybe we can get our cars tuned together! Im getting my TB put in right now, and I just bought a meth kit :twisted:.

[MR. Birdie]

lol install two vsr manifold in one day and getting it tune. Is that possible ? hahahaha

[GokuSSJ4]

lol install two vsr manifold in one day and getting it tune. Is that possible ? hahahaha
you havent got that thing installed???
if you dont want it, ill buy it from you Mr birdie :D

[TeKiZeRo]

Haha, you both a freaken' nuts. Can't wait to see the number after you get tuned...

[MR. Birdie]

lol install two vsr manifold in one day and getting it tune. Is that possible ? hahahaha
you havent got that thing installed???
if you dont want it, ill buy it from you Mr birdie :D


It's getting there haha just need the pipping in =D

[GokuSSJ4]

they have 2 options available in the AMS website, which on did you purchae ??? dual rails or single ?? bling bling or no bling bling lolll

[MR. Birdie]

pictures of my toys

http://www.socalevo.net/forum/index.php?topic=41670.0

[GokuSSJ4]

pictures of my toys

http://www.socalevo.net/forum/index.php?topic=41670.0

accordinly to the AMS site that would be the single rail (not polish) for 900.00 correct? to get the unit polish is an additional 200.00 correct?

[GokuSSJ4]

do you know what the unit would look like not polish ??? im wondering how it will look, since i want something (look wise) similar to the oem piece

[vortech_g35]

I think the unpolished ones are just silver, no clear coat just like there FMIC. The FMIC in the picture looks polished, but its just silver.

[vortech_g35]

BTW paul or alfred, for my appt. also I need to install a meth kit. :D, Thanks

[Alfred@TTech]

The custome vsr piping is here. I have to do some test fitting for different recirc/BOV setups but they should be all finished up by next week. Ill let you guys know.

Alfred

[vortech_g35]

Awesome! It's perfect timing also because I get all my parts on the 22nd-23rd.

[vortech_g35]

Alfred,

My car is running funny. I was wondering if you could fit me in next week. It seems like I am not getting full power anymore. Both my gauges show 21 Psi, but it just feels 10x slower. I can't figure out what it is really, since I believe I am not getting any boost leaks. Do you think it might be the injectors? Thanks

[MR. Birdie]

The custome vsr piping is here. I have to do some test fitting for different recirc/BOV setups but they should be all finished up by next week. Ill let you guys know.

Alfred


OH YEAH BABY

[Evo8urv8]

BTW paul or alfred, for my appt. also I need to install a meth kit. :D, Thanks


TT does meth kit now too? :? (I mean, as in installation and tuning) :grin:

[vortech_g35]

they don't?

[Evo8urv8]

they don't?

Not from what I know of. All I know is they tune pump and race gas only. So u might wanna ask or call them to find out.

I know Harman Motive sells and tunes alky/meth. I think XS Engineering too. I remember reading an article on one of the current magazines on the newstands about XS did a meth install and tune on some evo. Forgot what mag it was though :-(

[MR. Birdie]

I wonder if the VSR is goign to help that much.

[vortech_g35]

I spoke with Eric @ AMS, and he said you should gain more hp, with only one drawback which is later spool. Depending on the size of the turbo, you should gain anywhere from 15-50 hp.

[MR. Birdie]

shit if i can get 30whp out this with a TB. It would put me exactally in the 400whp range on pump. So my 20G " potential " 500whp turbo on C-16 and 30+psi. WOOOHOOO. i hope this intake manifold dont let me down.

[vortech_g35]

I am hoping for 475 whp w/ meth :D.

[Evo8urv8]

I am hoping for 475 whp w/ meth :D.

So, is Alfred gonna tune u too for meth then? or u gonna go somewhere else? :?

[vortech_g35]

Ya, I am getting tuned @ TT. I might be the lab rat, hehe.

[1WkdEvo]

Vortech, did you ever figure out your power loss issue?

[Evo8urv8]

Ya, I am getting tuned @ TT. I might be the lab rat, hehe.


Lab rat :2funny:

When are u planning to get it tuned? :?

Don't go too crazy after u get the meth tune or your lab rat (your evo or turbo) might become like this (http://video.google.com/videoplay?docid=1569125216323959688&q=hamster) :D

[vortech_g35]

Ya, my problem was bolts off my manifold came loose and fell off. I am having spool up issues & leaks because of that. I am planning on getting it tuned Wednesday, so feel free to stop by. The intake manifold is a long job, so I'm guessing tuning will begin @ night. For me not to go crazy is probably gonna be impossible. I'm planning on a stroker motor by Dec. so I'm gonna keep pushing :D.

[1WkdEvo]

Damn, I would like to be there Wednesday just to see the mani and what results you get above your current baseline, but alas my daughter has dance that night and Daddy has to be there :( Good luck, I can't wait to see the post

[vortech_g35]

You might be in luck!! It might be a two day install, so we might get it done Thursday Morning.

BTW your daughter would not approve of your icon.... :2funny:

[1WkdEvo]

LOL, True. I had her on there for a while, then me in a compromising situation, now some random hottie. It changes on a frequent basis or when a moderator tells me someone complained about it :-)

[vortech_g35]

someone would actually complain about that.....wow

[1WkdEvo]

You have no idea, "It's mind bottling" ;-)

[Evo8urv8]

You have no idea, "It's mind bottling" ;-)


U mean, boggling, rite? :D

[1WkdEvo]

Hehehe, nope, actually I meant bottling.Â* It is in quotations because it is a quote from Will Ferrel on "Blades of Glory"Â* It was wrong on purpose, but thanks for paying atention brutha :grin:

[GokuSSJ4]

shit if i can get 30whp out this with a TB. It would put me exactally in the 400whp range on pump. So my 20G " potential " 500whp turbo on C-16 and 30+psi. WOOOHOOO. i hope this intake manifold dont let me down.

Just adding a ported TB has seen around 6-7whp with an EMS.. not sure how that would affect it with the stock ECU.
30whp out of a intake mani would be insane... even more than the turbo you purchase... loll even if i can get 15-20whp out of the green turbo, that would be great! I wouldnt expect much out of an intake though, but hey you never know. Keep us update MR birdie, i wanna know if is worth it doing an IM on a stock turbo or not.

[vortech_g35]

I believe you get 5-8whp on a stock ecu, but I might be mistaken. Hope we just have freak cars and we get 100 whp, :D.

[Evo8urv8]

Hey Mr. Birdie. I dunno if you already seen this (http://forums.evolutionm.net/showthread.php?t=269303) :-o

[Smogrunner]

Where the heck are the details? I'm dyin' here.

[vortech_g35]

details for what?

[vortech_g35]

I'M FINALLY HERE!!! WOOOOOOOOOOO!!! but its boring just sitting around. I'll take pics of my toys and post them up later.

[GokuSSJ4]

I'M FINALLY HERE!!! WOOOOOOOOOOO!!! but its boring just sitting around. I'll take pics of my toys and post them up later.
DO IT!!!! DO IT NOW!!!!

[vortech_g35]

I put my digital camera at my friends house before I came. He is bringing it when he is done with class. LATER!!!!!

[MR. Birdie]

So your at TT right now getting the VSR install?

[vortech_g35]

I had a issue with my car, so I had to come earlier for my appt. But since I am here, I am installing everything.

GT35 + VSR + METH = :D

[MR. Birdie]

Do you know they have the extra VSR pipping for me also?

[vortech_g35]

Once they make mine, I believe they are gonna order yours, so you won't be down for so long. My car has to be here for 4 days :(. Just to let you know, you had to order the map sensor for the VSR if you are running stock ECU.

[GokuSSJ4]

i have been considering the VSR Â*but on the stock turbo.... dont know how much (if any) the car will benefit from it...
that's a nice set up you are getting. is this all in the stock ECU or do you have a standalone ???

[GokuSSJ4]

Once they make mine, I believe they are gonna order yours, so you won't be down for so long. My car has to be here for 4 days :(. Just to let you know, you had to order the map sensor for the VSR if you are running stock ECU.

ah..... the only way im assuming in order to get rid off the stock sensors, like the EGR ... i heard people mentioned that theres a way to disable to EGR feature with Open ECU but not many if any have mess with it...

[GokuSSJ4]

no "inhouse" production on the upper intercooler pipe that needs to be created in order to work with the VSR ??

[vortech_g35]

They have to order the piping.Â*I am on stock ecu @ the moment as I am daily driving the car @ the monent. I will probably switch over the standalone when the stroker comes into play. VSR with stock turbo :crazy2:?Â* I dunno bout that, as you could spend the $1000 on something like Meth which would gain you more HP.

[GokuSSJ4]

They have to order the piping.Â*I am on stock ecu @ the moment as I am daily driving the car @ the monent. I will probably switch over the standalone when the stroker comes into play. VSR with stock turbo :crazy2:?Â* I dunno bout that, as you could spend the $1000 on something like Meth which would gain you more HP.
loll stock IX turbo or even a 20g L green dog (just about the same)
at the moment im not a big fan of the large turbos... stroker will come first before a big turbo...

[vortech_g35]

Yes, the bigger they are the harder they fall, but when I do my stroker, I want to rev to 9500 or 10k.

[MR. Birdie]

Yeah you didn't get the map sensor adapter when you order the VSR? I told them i'll be running the stock ecu and they told me I need the adapter to run the stock ecu. Or something like that. It was a extra 75 bux.

Wait, I thought they already have the pipping in? what's going on? AMS does make a custom pipping for it but you cant use the factory Battery or a factory Air box.

[GokuSSJ4]

Yeah you didn't get the map sensor adapter when you order the VSR? I told them i'll be running the stock ecu and they told me I need the adapter to run the stock ecu. Or something like that. It was a extra 75 bux.

Wait, I thought they already have the pipping in? what's going on? AMS does make a custom pipping for it but you cant use the factory Battery or a factory Air box.

does it work on IX's?
since with the additional Mivec and everything ...

Yes, the bigger they are the harder they fall, but when I do my stroker, I want to rev to 9500 or 10k.

arent you limited to 8500rpms?
unless you go with a 2.4 l, does that allow you more?
the only ones i have seen rev high are the de stroke set ups in the 2.1l area , and perhaps the cossie shortblock 2.2l

[MR. Birdie]

Well from what Eric told me from AMS, You need the MAF sensor adapater for you to run the stock ecu. It actually 65 dollar. I order everything I need when I got my VSR manifold. Also AMS do make custom pipping for the VSR. I might go with that route.

Vortech_G35 I don't understand are they re-doing the pipping? Let me call them to find out.

[vortech_g35]

*UPDATE* AMS does sell it, I guess I spoke to a newbie :knuppel2:. Everything should be good now Mr.Birdie.

Goku, yes you are right, as usually built 2.0 go to 9500 rpm.Â* I am hoping for a custom stroker kit to allow me reach 10k :D.

[GokuSSJ4]

didnt you ever consider this intake manifold?
http://www.speedelement.com/components/com_virtuemart/shop_image/product/17bc8be921c7ca418781fffd3ad81ff5.jpg

[MR. Birdie]

didnt you ever consider this intake manifold?
http://www.speedelement.com/components/com_virtuemart/shop_image/product/17bc8be921c7ca418781fffd3ad81ff5.jpg


If that the HKS one, then it a nice unit BUT it would not fit on the US spec evo due to the ABS unit blocking the manifold. So for you to make it work is to re-route the ABS lines I believe. THE AMS one is fine and works great.

Told you G35! But I talk to paul and he said the pipping is coming in? So I guess I should just wait for it then.

[SNEAKYEVO]

Is your car going to be there Friday?

[vortech_g35]

Yes, my car will be here friday. I am leaving TT right now as I have stuff to do, but Jenn thought I was using the stock airbox so I had to make custom piping. My car will probably be tuned on either thursday or friday :D. PEACE OUT!!

[MR. Birdie]

Yes, my car will be here friday. I am leaving TT right now as I have stuff to do, but Jenn thought I was using the stock airbox so I had to make custom piping. My car will probably be tuned on either thursday or friday :D. PEACE OUT!!


Wait so your not using the stock airbox? Strange, I wonder were my pipping is.

[vortech_g35]

I am not using the stock airbox as I have the intake that came with my GT35 kit. Jenn thought since you were using the stock airbox, that I was using the stock airbox as well. The AMS VSR piping fits only if you don't use the stock airbox and have a mini battery kit.

[MR. Birdie]

I am not using the stock airbox as I have the intake that came with my GT35 kit. Jenn thought since you were using the stock airbox, that I was using the stock airbox as well. The AMS VSR piping fits only if you don't use the stock airbox and have a mini battery kit.


wait do you know if my pipping is there? LOL man im so confused now.

[vortech_g35]

haha, that I don't know, but I'm pretty sure Jenn was making you a pipe.

[Jenn@ttech]

Hey V I will call you in the morning.... :smiley6600: We can get u in next week! :mitsu:

[Evo8urv8]

Yes, the bigger they are the harder they fall, but when I do my stroker, I want to rev to 9500 or 10k.


U might wanna get this engine setup (http://forums.evolutionm.net/showthread.php?t=246348&highlight=AMS) if u wanna rev past 9k. :twisted:

Sorry, 9100 is the most u can go for for drag, 8500 for road race O0

[vortech_g35]

When my car is finished, im going to try and beat Jenn :D.

[Evo8urv8]

When my car is finished, im going to try and beat Jenn :D.


Settle it in Famoso Raceway in Bakersfield so it'll be closer for me to drive. :D :grin:

[MR. Birdie]

Hey V I will call you in the morning.... :smiley6600: We can get u in next week! :mitsu:


*DROOL* THANK YOU So MUCH! I'll pm you my cell # jenn!

THANK YOU THANK YOU

[vortech_g35]

****************UPDATE PICTURES***********************

http://i102.photobucket.com/albums/m108/akang_94/DSC01451.jpg

http://i102.photobucket.com/albums/m108/akang_94/DSC01450.jpg

http://i102.photobucket.com/albums/m108/akang_94/DSC01449.jpg

http://i102.photobucket.com/albums/m108/akang_94/DSC01450.jpg

http://i102.photobucket.com/albums/m108/akang_94/DSC01461.jpg

http://i102.photobucket.com/albums/m108/akang_94/DSC01453.jpg

[GokuSSJ4]

are you running a standalone or stock ECU???
what measurements will be taken in order to accommodate the new added intake manifold....

[vortech_g35]

Stock ecu. To your second question, we make sure the bolts are on.

[SNEAKYEVO]

See you in the AM if your going to be there.

[vortech_g35]

I think I'll be there @ 9, not sure though. I am very lazy..

[GokuSSJ4]

Stock ecu. To your second question, we make sure the bolts are on.
bah!
i have asked this kind of question before but it never goes answer and since you are actually getting the work done, i would assume that they have communicated certain things with you.. or perhaps had some type of discussion..
will this affect the EGR?
how will it affect not having all the sensors the OEM intake mani has ? have they been added to the new mani? is this an easy thing to do? how will this affect the ECU ...
last respond i got from Mr birdie was " i dont care about the light" loll but i wanna know what things are affected by not having all these items.. or can they be by pass

[vortech_g35]

I'll give you a answer. The VSR eliminates alot of things such as boost solenoid, sensors, fuel regulators, etc. Alfred has told me I will probably come up with a bunch of codes for such things, but when you go such lengths to get power, you really don't care about those things. It would be a different story if we were on standalone, but why people stay with the stock ecu is because of daily driveability. You want your ecu to control such things so it doesn't effect your day to day drive. If you can't handle the light, disconnect it or like me, my boost gauge covers the light.

[GokuSSJ4]

well thats the thing.. with all the advance that has been done with the stock ECU , i figure someone could of touched something similar to this...or at least figure something out, besides the approach of it is what it is... lights all over the place loll..

[MR. Birdie]

From what I talk to Eric, he told me the only thing that is missing would be the EGR system. The EGR system doesn't affect your driveability period, beside give you better gas milage. But when your making big power who cares of about gas milage? I certainly dont care about it since i'll have a second car to save gas on. My evo is going to be strictly high boost when I get the chance and road racing. No check engine light is going to scared me! HA!

Stop beeing such a pussy Goku and ask to many damn quesition, just get this manifold already. If it make you happy, buy the AEM EMS and that should make you sleep easier at night.

[vortech_g35]

ehhhh...you'll get over it. Â*The looks of the VSR is pure sex.

[GokuSSJ4]

From what I talk to Eric, he told me the only thing that is missing would be the EGR system. The EGR system doesn't affect your driveability period, beside give you better gas milage. But when your making big power who cares of about gas milage? I certainly dont care about it since i'll have a second car to save gas on. My evo is going to be strictly high boost when I get the chance and road racing. No check engine light is going to scared me! HA!

Stop beeing such a pussy Goku and ask to many damn quesition, just get this manifold already. If it make you happy, buy the AEM EMS and that should make you sleep easier at night.
loll.. at the moment my current plans are 20g L turbo and headwork....
mani after im done with all those things.... :D

[GokuSSJ4]

ehhhh...you'll get over it. The looks of the VSR is pure sex.
yes it is!!!! thats why it makes it even harder to say "no" to it loll

[MR. Birdie]

ehhhh...you'll get over it. The looks of the VSR is pure sex.
yes it is!!!! thats why it makes it even harder to say "no" to it loll


head work! com on goku this isn't a honda =P. hahahahhahahaa just put c-16 and run 33psi. You'll be fine!! don't need head work.

[GokuSSJ4]

its ashame that there isnt a company out there that makes a mani OEM quality and that allows all the OEM sensors .... unlike some of the many options they have for the "H" camp, like this
http://www.tunerschoice.com/eccStoreFront/product_images/01_Engines/325-4760_L.jpg
simply beautiful!!!
an Mr birdie, the samething can be said about your mani set up on a stockies turbo, this isnt a honda loll

[MR. Birdie]

^^HAHAHAHAHAHA lol

Hey G35, are you getting tuned tomorrow? Let us know the outcome.

[vortech_g35]

The funny thing is the VSR looks so big out of the box, but when put on, it is like 3-4 inches lower then the placement on your stock manifold piping bolts up.

[vortech_g35]

I dunno about tune tommorow, we might not finish as the meth might not be done till Sat. Morning.

[MR. Birdie]

awww, alright.

[SNEAKYEVO]

Saw your car there today. Very nice set up! O0

[MR. Birdie]

any updates yet?

[vortech_g35]

quick, got up to 422 whp on 91 octane.

this is andrews friend tom btw =D

[MR. Birdie]

quick, got up to 422 whp on 91 octane.

this is andrews friend tom btw =D


Nice so a gain of 22whp with vsr ? How about torque?

[vortech_g35]

We weren't really trying to go for peak numbers, but when I post up my graph later. We compared my previous graph and this one, the results came out to be I was making more HP at each RPM. In my previous graph I would just hit 407 and come back down, but here everything is constant and so is my tq. So before I was making 300 whp @ 4000, im not making 325 @ 4000. Only downside is that, turbo lag increased about 300-400 rpm for peak hp.

[MR. Birdie]

300-400rpm isn't a big difference, but good gains though! please post up the graph. I'm curious on how your dyno looks like. Overall is the manifold increase any engine noise?

[vortech_g35]

Manifold makes no additional noise.

[MR. Birdie]

kool, you got your graph?

[vortech_g35]

I do, but I'm too lazy to scan it.

[WOT]

So before I was making 300 whp @ 4000, im not making 325 @ 4000. ? is "not" a typo for now? it looks as if you picked up 25whp @ 4k O0


Only downside is that, turbo lag increased about 300-400 rpm for peak hp.
? did lag increase or did your peak power / rpm just change? i can see how the vsr will move peak power higher in the rev range.

What rpm did your car make peak power?

[MR. Birdie]

post the graph already. I'm thinking about not installing my VSR anymore. I thinking of going with the porting stock IM and Exh. Manifold, route.

[GokuSSJ4]

post the graph already. I'm thinking about not installing my VSR anymore. I thinking of going with the porting stock IM and Exh. Manifold, route.
loll
what happen?

[MR. Birdie]

post the graph already. I'm thinking about not installing my VSR anymore. I thinking of going with the porting stock IM and Exh. Manifold, route.
loll
what happen?


cause im a hooker and I don't know what I want anymore lol. Damn it just to much work trying to find a stock intake manifold to send out to Buschur to have them port it. The amount if spend on the VSR and get it install, I can jsut port the living poop out the stock one and have left over cash to do a c-16 map at 33psi.

[GokuSSJ4]

post the graph already. I'm thinking about not installing my VSR anymore. I thinking of going with the porting stock IM and Exh. Manifold, route.
loll
what happen?


cause im a hooker and I don't know what I want anymore lol. Damn it just to much work trying to find a stock intake manifold to send out to Buschur to have them port it. The amount if spend on the VSR and get it install, I can jsut port the living poop out the stock one and have left over cash to do a c-16 map at 33psi.
you already have the mani... get those pipes made and install it already !!! LOL

[MR. Birdie]

or the rre custom one that is being made for me. Â*I had an am intake and i dont like the look so i went back to stock airbox with hard pipe. Â*i want as stock looking as possible until i go stupid stroker power
intake manifold , correct?
freaking Ty lags too much :tickedoff:


talking about lag! G35 got his pipping before me? how in earth is that possible. Jenn told me that they only have the upper pipe but missing one of the pipe. Now the owner of nesei might be out of town. This intake manifold probably will take me 10 years to put on. I'm going to call her, if he really out of town, I might just order the pipping from AMS.

[vortech_g35]

you guys talk too much, lol. I'll post up my graph later. The lag did increase on my turbo, as before I would hit peak boost @ 4500, now I hit around 4800. Overall the power did increase throughout the RPM band. Hey WOT, my Tb makes a funny sound when I hit the throttle. It's like a squeaky sound, is it normal?

[MR. Birdie]

June 16th, my appointment. roar!

[1WkdEvo]

Congrats, now we can all see what you get.

[GokuSSJ4]

June 16th, my appointment. roar!
loll congrats!!!

[MR. Birdie]

we will see how the car act. I talk to the guys at AMS about the VSR on a evo 9. They said the result are the same as the one they posted a while back on the evo 8. Little lost in spool and gain everywhere in the powerband.

I know for sure this manifold will shine when I come back to install my new actuator and get a full C-16 race map at 35lbs of boost.

[vortech_g35]

I'll be there June 13th to install my meth :D.

[MR. Birdie]

G35, you probably start noticing a big difference with manifold on meth.

[GokuSSJ4]

which WGA are you purchasing Mr. Birdie?
the one from FP (couldn't find it being sold individually)
or the Forge one (sold by lancershop.com) Thats next before i get the car tune

[vortech_g35]

I heard hyori is a slut(gold digger), lol. Kinda OT.

[MR. Birdie]

which WGA are you purchasing Mr. Birdie?
the one from FP (couldn't find it being sold individually)
or the Forge one (sold by lancershop.com) Thats next before i get the car tune


most likely im going to get the forge actuator. I need the 18psi spring so My ebc is able to double it. Which will be max boost at 35psi. * evil laugh *

[MR. Birdie]

I heard hyori is a slut(gold digger), lol. Kinda OT.


Yes its way off topic, and post your damn graph already you damn lagger!!!!

[GokuSSJ4]

which WGA are you purchasing Mr. Birdie?
the one from FP (couldn't find it being sold individually)
or the Forge one (sold by lancershop.com) Thats next before i get the car tune


most likely im going to get the forge actuator. I need the 18psi spring so My ebc is able to double it. Which will be max boost at 35psi. * evil laugh *

arent they both kinda the same ??? i didnt see the specs on either one though,... just heard about hte 18psi spring

[vortech_g35]

I'm going to run 99 psi with a 33psi spring + nitrous + C20 race gas.

[1WkdEvo]

That should be good for a ka jillion hp like i said b4 :-)

[vortech_g35]

Ka jillion or Infinite Ka Killion Jillion Zillion?

[1WkdEvo]

Sorry, your'e right I meant Infinite, omnipotent, evo master Ka Killion Jillion Zillion.Â* What was I thinking? :-P

[vortech_g35]

I see underneath yours posts! You want me to blow my motor, so you can steal my parts...EVIL!!!

[1WkdEvo]

Damn, you busted me...sorry, I don't usually revel in other peoples troubles, but yeah, grenade away brutha muhahahahaha

[vortech_g35]

I'm going 10 psi max mother ******. lol.

[1WkdEvo]

LMAO...rightttttttttttttttttt

[vortech_g35]

Do you think I need a new BOV, since I heard the stock BOV only holds to 26 psi.

[1WkdEvo]

Depends on who you ask. Since Alfred is your tuner, i would consult him and he will tell you yes, so yes :-)

[vortech_g35]

well, you were no help...

[1WkdEvo]

I get that a lot. Honestly though, if Alfred says you need it, then you need it, so just do what the man says and be safe since he is the one you are trusting to max out your cars potential

[vortech_g35]

I'm just messing, thank you very much :).

[1WkdEvo]

I know :-) I'm just jealous so bear with me hahahaha

[MR. Birdie]

all this useless post and still no graph G35. * shake head in shame * LOL.

[vortech_g35]

Just in spite, I'm going to post them up June 16th, HAHAHAHAHA.

[MR. Birdie]

wowerz lol

[WOT]

Hey WOT, my Tb makes a funny sound when I hit the throttle. It's like a squeaky sound, is it normal?
did this happen after you instslled the vrs intake? i didnt hear any noise when i origianlly installed it on our oem intake when you came over....

i do have a fix to get rid of the whistle, right off of idle, that seems to be working pretty good so far.

if mr. birdies whistles, then the fix didnt work & alfred can laugh some more.

[vortech_g35]

How can I fix it?

[WOT]

^ you wont, i will O0

pm me & I will elaborate on the details.