PDA

View Full Version : The new Stealth look, well sorta.



StockEVO
06-30-2007, 06:11 PM
Here's another one of my project I'm doing on the side at home. Car belongs to smokinevo9. After much discussion and thorough planning. I decided to make this somewhat "smog legal" in relation to all stock sensor excluding EGR are intake and there shouldn't be any CEL once I fire the car up. I ditched the RnR intake manifold and turbo kit. All I gotta say is what hunk of shit the part where. Everything from generic manifold gasket to a jar of JB weld to make things seal up. Car now have the Magnus Intake manifold with provision for the MDP sensor hooked up and our turbo kit. Took me the whole day rearranging the stock wires around so it doesn't look rigged. All is left is to fab up the upper and lower intercooler pipe. I haven't decided what size I'm going to make the pipe. Maybe 2.5" for the lower and 2.75" for the upper and reuse his HKS BOV. Maybe this is a good time again for me to try out the MAF translator setup again or just say screw that and go full blown EMS.

Here's some before and in process work.

StockEVO
06-30-2007, 06:12 PM
Some more pictures.

StockEVO
06-30-2007, 06:13 PM
More pics

smokinevo9
06-30-2007, 06:15 PM
do wat ever you want brotha.................just dont blow it too soon just wait until i get there

StockEVO
06-30-2007, 06:16 PM
Last set of pictures show AMS fuel rail with stock fuel return lines and bracket. It took me awhile to make everything work and try my best to give it that clean look. I can't say if I was trying to give it that factory look but I tried to reused factory nuts, bracket, clamps and everything as much as possible.

StockEVO
06-30-2007, 06:18 PM
Ok last last picture. This one show I have to rig the dip stick for now till I fab up and weld a bracket to secure the thing down. And yes there's two black zip ties you see there.

Peter314
06-30-2007, 06:24 PM
looks good. btw what exhaust manifold is that and did you have to do anything to get the arc heat shield to fit?

StockEVO
06-30-2007, 06:26 PM
The exhaust manifold is from our turbo kit. It's a cast unit with mounting boss for factory heat shield or aftermarket one that made to fit the stock manifold. There's some trimming involved but unless you're skilled with a set of shears. It takes patience and some card board trial and error to make it fit just right.

Peter314
06-30-2007, 06:31 PM
thanks. it looks really clean O0

hellgunner
06-30-2007, 07:31 PM
what a beast!

j_nizzle
06-30-2007, 07:59 PM
mon's car is gonna be more of a beast than what it was already!!!

balla!!!!!!!!!!!!!!!!

05-EVO-GSR
06-30-2007, 08:01 PM
4 inch intake?

StockEVO
06-30-2007, 08:34 PM
Yes he's getting a 4" intake.

GokuSSJ4
06-30-2007, 08:39 PM
well let me know once you are done with the intake manifold, since i sure would be interested in something that keeps all sensors and EGR OEM locations or as close as possible, since not all of us get away from using the stock ECU.
Also how about coating the mani to take the bling bling look from it? something near the OEM alike color would of been nice Ty ..
an Ty :pissedoff: this should of been done long long time ago :buck2:

GokuSSJ4
06-30-2007, 08:40 PM
Yes he's getting a 4" intake.

why can i get a 4" intake for my stock turbo :D lolll... now i have to buy an HKS intake arm, since you wont do it... no bueno!!!

wilson1
06-30-2007, 08:45 PM
Do you lost much in TQ when u go with a Magnus Intake manifold, Ty?

GokuSSJ4
06-30-2007, 08:47 PM
Do you lost much in TQ when u go with a Magnus Intake manifold, Ty?
keep in mind that this car is equip with a 2.4l and a gt35 turbo, its far from stock ... (well at least i believe that's the right set up on Mon's car...

smokinevo9
06-30-2007, 09:24 PM
Do you lost much in TQ when u go with a Magnus Intake manifold, Ty?
keep in mind that this car is equip with a 2.4l and a gt35 turbo, its far from stock ... (well at least i believe that's the right set up on Mon's car...

yo thomas not yet but that set-up is in the near future..................when ever this thing goes.

1WkdEvo
06-30-2007, 09:26 PM
Yeah, no stroker for Mon yet.Â* Nice setup Mon and happy for you that it is almost ready to hit the streets O0 Congrats brutha

smokinevo9
06-30-2007, 09:28 PM
Yeah, no stroker for Mon yet. Nice setup Mon and happy for you that it is almost ready to hit the streets O0 Congrats brutha

thanks bro and believe me im hoping the same for you...

1WkdEvo
07-01-2007, 07:43 PM
Thanks, me too :(

Miss Evo8
07-01-2007, 08:39 PM
Ghetto rig FTL.... heard about your "mess" Mon... pretty sad... but its all fixed now so that's good O0

tontonh09
07-01-2007, 08:47 PM
mon's car is gonna be more of a beast than what it was already!!!

balla!!!!!!!!!!!!!!!!
and don't drive his car to the meet always bring his BALLA SUV lolz...

sp0rk
08-04-2007, 02:11 AM
rre ftw

spoolinbyu
09-11-2007, 05:03 PM
MON did you learn your lesson not to let unskilled kids touch your car. . .TY FTW. . .

Miss Evo8
09-11-2007, 05:52 PM
mon's car is gonna be more of a beast than what it was already!!!

balla!!!!!!!!!!!!!!!!
and don't drive his car to the meet always bring his BALLA SUV lolz...


This one time in the cul de sac...... I almost got ran over by Mon and his Ghetto Fab Escalade... he came screaming around the corner on 3 wheels....

spoolinbyu
09-12-2007, 12:53 PM
hahaha mon and that escalade i hear him bumping the stereo and i run and hide behind cars in fear of being killed by the 26'S hahaha. . .

StockEVO
09-12-2007, 12:56 PM
I thought Mon have 32's?

GokuSSJ4
09-12-2007, 12:58 PM
where have you been Ty?
busy with life

StockEVO
09-12-2007, 01:40 PM
I was in PA. Sorry just got back.

smokinevo9
09-12-2007, 01:41 PM
I was in PA. Sorry just got back.

nice to have u back brutha........................

smokinevo9
09-12-2007, 01:45 PM
sneak peak
http://img136.imageshack.us/img136/5276/picture1144zw3.jpg

spoolinbyu
09-12-2007, 01:47 PM
TY was just hiding hahaha. . .didnt want to hear about any of GOKU'S parts wish list. . .hahaha

CRX2EVO
09-12-2007, 01:51 PM
I'd write you a ref ticket

smokinevo9
09-12-2007, 01:55 PM
I'd write you a ref ticket

y u trying to do me like that bitch........................

spoolinbyu
09-12-2007, 01:57 PM
YO MON whats up with those seats

smokinevo9
09-12-2007, 01:59 PM
YO MON whats up with those seats

which ones since i just got back from BUDDYCLUB and they have taken care of the mistake they made............kool

spoolinbyu
09-12-2007, 02:01 PM
so BC fixed there mess up. . . by the way i cut the shit out of my arm and have a scar from those F***ing seats

smokinevo9
09-12-2007, 02:03 PM
so BC fixed there mess up. . . by the way i cut the shit out of my arm and have a scar from those F***ing seats

my bad you shouold have mounted the rails first and than just slide the seat from top and screw them down...........
how did you install them........lol.......but any how big thanks brutha

spoolinbyu
09-12-2007, 02:05 PM
i forgot how it happened it is all good didnt hurt. . .so what are you up too

Miss Evo8
09-12-2007, 02:53 PM
I'd write you a ref ticket

y u trying to do me like that bitch........................


:2funny:

StockEVO
09-12-2007, 03:10 PM
I think he was joking Mon.

smokinevo9
09-12-2007, 03:53 PM
I think he was joking Mon.

just playing along....................hahahaha

spoolinbyu
09-12-2007, 03:56 PM
relax MON it is all good i got your back. . .wait can we go sit in the caddy for a minute you promised me i could when i am off probation hahaha

EvoPwr
09-12-2007, 03:58 PM
hahaha, mon makes a joke and everyone gets scared.....lol


i was too though ;)

spoolinbyu
09-12-2007, 04:04 PM
i dont per say think we were scared. . .

EvoPwr
09-12-2007, 04:05 PM
i dont per say think we were scared. . .


yea you were, scared mon was getting serious with crx guy ;)

spoolinbyu
09-12-2007, 04:07 PM
no not really. . .i know MON better then that

EvoPwr
09-12-2007, 04:08 PM
then why tell him to relax, its all good?

thisxguy
09-12-2007, 04:08 PM
Looks good O0

mon, im agreeing with john...that beast is going to be beastier (not a word but who cares. lol)

spoolinbyu
09-12-2007, 04:11 PM
it wasnt meant to be like we are scarred we dont really give two shits what MON does. . .you know what i mean we were all playing along with it sorry if you didnt catch that

smokinevo9
09-12-2007, 04:21 PM
damn buddys relax whos scare of who we are all buddys here..................................lol

EvoPwr
09-12-2007, 04:25 PM
damn buddys relax whos scare of who we are all buddys here..................................lol


lol, all in good fun, word to the wise, anytime anyone sees my name next to a post...don't take it serious, som,etimes i don't even read what i quoted :2funny:

goodluck in paris mon

spoolinbyu
09-13-2007, 11:29 AM
dont worry me and EVOPWR are kool. . .

StockEVO
09-13-2007, 11:46 AM
Are you two butt butties or spoon butties?

spoolinbyu
09-13-2007, 11:49 AM
TY i would never replace you with some one else i thought i told you that

StockEVO
09-13-2007, 03:42 PM
;)

GokuSSJ4
09-13-2007, 04:37 PM
hahahahahah! btw are you finally back at work?

spoolinbyu
09-14-2007, 09:28 AM
who TY he never works hahaha. . .he tells people that he will do it and then gets me to do it hahaha. . .

GokuSSJ4
09-14-2007, 09:42 AM
who TY he never works hahaha. . .he tells people that he will do it and then gets me to do it hahaha. . .
i heard that!!!! :D

spoolinbyu
09-14-2007, 09:47 AM
TY keeps me busy with HIS side jobs hahaha. . .but yet he is the BEST well let me say he is GOOD hahaha. . .(have to be nice to the boss)

05-EVO-GSR
10-21-2007, 05:21 PM
Do you hear alot of valvetrain noises with the intake manifold?

smokinevo9
10-21-2007, 05:28 PM
Do you hear alot of valvetrain noises with the intake manifold?

nope.............