How/ where to splice Reverse/ Ebrake Leads? JVC KD-NX5000

[SHIFTT IX MR]

I need help!

I am attempting to install a JVC KD-NX5000 into my Evo 9, however I am having trouble understanding the instructions.

here is a link to the instructions:
http://books.jvcservice.com/booklist.asp?Model=KD-NX5000&x=40&y=7
.
what I am having difficulty with is step B, and step D. I have already located the VSS wire in case people are wondering.

My question for step B is which wire do i splice into for the reverse light, or will any wire do?

And for step D, where is the wire I splice into for the parking brake lead?

I really need help with this.

Thank Guys!

PS. been using the search function for three days with no luck. Pictures would help greatly. If it makes more sense, I will pay someone VIA paypal for the correct advice; $25.00. This should help motivate some people, or at least I hope.

John

[antics22]

the ground wire.. just GROUND IT to the chassis. This should fool the unit into thinking the e-brake is on... for the reverse wire, ill have to remember.. I tapped it to a harness by the passenger side kick panel...

[endlessCT9Amr]

I would be interested in knowing where the VSS wire is... and how best to tap into the reverse light.

[antics22]

I would be interested in knowing where the VSS wire is... and how best to tap into the reverse light.


Courtesy of Jojima:

http://www.socalevo.net/gallery/albums/userpics/15075/DSC_3443.JPG

[endlessCT9Amr]

I would be interested in knowing where the VSS wire is... and how best to tap into the reverse light.


Courtesy of Jojima:

http://www.socalevo.net/gallery/albums/userpics/15075/DSC_3443.JPG


Dope. Thanks... one question though... I have yet to play with the ECU... what's the best and easiest way to get access to it?