How do I adjust the windshield washer nozzle to spray lower?

[pjs4x]

My passenger side washer hits the windshield right now but one of the sprays on the driver's side nozzle is aimed higher and the spray actually ends up on the roof. Is there any way to adjust this without taking to the dealer. I bet it's an easy fix but just wanted to get feedback from the forum. Thanks in advance.

[Skiracer]

might have some wax or other gunk stuck in the nozzle. Try using a needle to clean it out...

[steve j]

might have some wax or other gunk stuck in the nozzle. Try using a needle to clean it out...


AND you can use the needle to direct the spray where you want it.

[thekhmer]

needle will work..just bend it all the way up to spray cars behind you..

[rino]

needle

[wayne]

I do not like the factory nozzles.
I found the following post to be helpful

http://forums.evolutionm.net/showthread.php?t=320945&highlight=nozzle

How to installe Flat-Spray Wiper Nozzles.
Pic and Video at the end, the picture is color coded to the instructions.

Here are the part numbers I ordered.
mr987467 left
mr598791 right
The nozzles look identical, if I had to do it again, I would order 2 of the Left nozzles as they come with extra hose, and most of your stock hose will be re-used.

[hytek369]

I do not like the factory nozzles.
I found the following post to be helpful

http://forums.evolutionm.net/showthread.php?t=320945&highlight=nozzle

How to installe Flat-Spray Wiper Nozzles.
Pic and Video at the end, the picture is color coded to the instructions.

Here are the part numbers I ordered.
mr987467 left
mr598791 right
The nozzles look identical, if I had to do it again, I would order 2 of the Left nozzles as they come with extra hose, and most of your stock hose will be re-used.



thats a great mod.Â* nice find on the write up

[tabio42]

The nozzles from above are way better than stock. And the install takes like 10 minutes.