IAC from stang to Evo 8

[evo mr]

i have an ams vsr and i install a 89 - 93 mustang throttle body and i am using the stang IAC , does anyone know what wires i have to splice to make the IAC to work. Thanks

[Blaze]

this might be better suited for the trouble shooting forum.

[Sean@fftec]

If Running an AEM the directions go as follows.

On the ISC plug there are 6 wires.

You have to take either one of the center 2 wires. Both wires are +12v. Next you take anyone of the corner wires and trace that back to it's ECU pin. Once you have found the corrosponding ECU pin you need to relocate that Pin to the AEM PW1 output Pin 33. Next you have to copy ALL THE ISC OPTIONS FROM THE MUSTANG MAP. We have done several of these and it works fine.

If running a stock ECU just buy one of these

http://www.fftec.com/product.php?productid=16532&cat=0&page=1