PDA

View Full Version : adjusting front camber



kautiongsr
02-27-2009, 02:50 PM
i have heard alot about flipping the camber bolt in the front to get a .5 degree of camber.. can someone show me which bolt?... or have a diagram of what to do thanks... after 1 track day noticed wear on my outside edges.... need more negative camber :D

triguy
02-28-2009, 12:00 AM
You shouldn't adjust it yourself unless you have an alignment tool. Otherwise the camber and toe will be off on each side. Changing camber changes toe. The bolt is top one at the base of each strut where it connects to the control arm. It's right behind the brake rotors. Just go in for a front end alignment. Ask them to flip the bolt and try to get as much negative camber as possible and zero toe. I got -2.25. Made a nice difference in turn in compared to the stock setting.

kautiongsr
02-28-2009, 05:57 PM
triguy .. hey thanks man.. yeah i work at a dealer so i can do the proper alignment there.. i was just lost on what bolt... :D anyways ill do it sometime this week and let everyone know how much camber i get.. thanks

jsyang15
05-13-2009, 10:52 PM
no idea, i have adjustable plates on my zeals :)