Clutch Help ASAP!!!

[swimmer160]

If someone who has experience in removing the clutch on an '03 could pm me, I need some help on the process. I have a write-up for it but I'm getting conflicting views on it and I need some clarification. Need some help!

[boostinbyyou]

post the write up....

[swimmer160]

Right now I can't because I'm at the auto hobby shop on Camp pendleton and I'm posting from my blackberry.Â* I need some help regarding the output drive shaft.

If someone could pm me I really need this help.

[pikadosboy]

Right now I can't because I'm at the auto hobby shop on Camp pendleton and I'm posting from my blackberry. I need some help regarding the output drive shaft.

If someone could call me I really need this help.

My number is 9893211458, my name is Tyler.
you need a slidehammer !

[boostinbyyou]

You will only have to remove the front part of the driveshaft. This is done by removing the four bolts from the center of the driveshaft. The front half should now drop down and you can pull the driveshaft out of the transfer case.

[boostinbyyou]

i dropped the slide hammer on my foot on friday.....OUCH....lol

i think he means the shaft to the rear transfer case...

[pikadosboy]

i dropped the slide hammer on my foot on friday.....OUCH....lol

i think he means the shaft to the rear transfer case...
you dont need to removed the drive shaft for doing a clutch, you dont even need to remove the t-case. This will save you a lot of time.

[boostinbyyou]

i have only done an evoX clutch.....

[pikadosboy]

i have only done an evoX clutch.....


i have done just 3 clutches on evo X and like over 95 and counting on VIII and IX! LOL.
I have to say! no mater how many clutches i have done, its always a bitch.

[swimmer160]

i have only done an evoX clutch.....


i have done just 3 clutches on evo X and like over 95 and counting on VIII and IX! LOL.
I have to say! no mater how many clutches i have done, its always a bitch.



If you could ring me up that'd be fantastic.

YGPM...

[boostinbyyou]

Javi has lots of experience.....

[swimmer160]

thanks alot you guys, I got it figured out, however, the hobby shop doesn't have the right kind of slap hammer for me to use, so now I gotta go find one. I appreciate the help.

[turbolarry]

Slap hammer? Is that the same as a slide hammer? If so, Harbor Feight has a small one that worked for me. $20
http://www.harborfreight.com/cpi/ctaf/retail_stores.taf#CA

[boostinbyyou]

its funny, but that place has some really important things.....hahahhhahh

[swimmer160]

Slap hammer? Is that the same as a slide hammer? If so, Harbor Feight has a small one that worked for me. $20
http://www.harborfreight.com/cpi/ctaf/retail_stores.taf#CA


That seriously just saved me so much trouble! Thank you!!!

[turbolarry]

No problem. I just feel a little guilty abouy buying junk from China, but that slide hammer really hasn't seent the light of day since I did my clutch. Damn this economy.
Anyways. Good luck. Keep us posted.

[scumbee]

i dropped the slide hammer on my foot on friday.....OUCH....lol

i think he means the shaft to the rear transfer case...
you dont need to removed the drive shaft for doing a clutch, you dont even need to remove the t-case. This will save you a lot of time.
wait what!!!!!!!!!!!!!
i dont need 2 take of the tranfercase????
is there a right up about this?????
cuz right now im doing a clutch job on mine and right now im in proses of taking the tranfer case off

[pikadosboy]

i dropped the slide hammer on my foot on friday.....OUCH....lol

i think he means the shaft to the rear transfer case...
you dont need to removed the drive shaft for doing a clutch, you dont even need to remove the t-case. This will save you a lot of time.
wait what!!!!!!!!!!!!!
i dont need 2 take of the tranfercase????
is there a right up about this?????
cuz right now im doing a clutch job on mine and right now im in proses of taking the tranfer case off
hahahahahah GL taking the transfer case off.

[scumbee]

sooo then i dont have 2 take it off?????????

[scumbee]

any one??????

[pikadosboy]

any one??????
no!

[jbenosa]

pikadosboy knows his stuff, he's the man when it comes to anything w/ our rides.

[scumbee]

i got the clutch out but now the thing is that i cant get the flywheel off :(.....its on pretty good im using the correct socket right????
17mm

[pikadosboy]

i got the clutch out but now the thing is that i cant get the flywheel off :(.....its on pretty good im using the correct socket right????
17mm
pls dont damage the crank taking off the flywheel.

[scumbee]

has any one rebuilt their clutch ????
hahah im kinda low on money

[xxblazexx]

One guy tryd that route fucked his whole shit up

[scumbee]

ok ill stay away from that...ok sooo right now im having problems with the fly wheel i cant get them damn bolts off :(
is there a way 2 make these lil bad boys come out easier

[thecaboy37]

ya get a big strong impact gun, and that should do it for ya. It worked for me.

[thecaboy37]

Has anyone taken out the hole center cross member in order to take the tran out, in order to replace the clutch?

[pikadosboy]

Has anyone taken out the hole center cross member in order to take the tran out, in order to replace the clutch?
OMG! :buck2: :buck2:

[mrobs15]

stop bumping all the clutch threads! lol

[pikadosboy]

stop bumping all the clutch threads! lol
bump! hahahahahahahaha