Stasis
03-10-2009, 07:35 PM
Mods:
AMS Downpipe
AEM Intake
Ultimate Racing Catback
Works P2 Flash + Tune
http://istasis.com/Dyno.JPG
Sorry for the lack of baseline and the final torque reading was 285lbs. The baseline for both hp and torque should be around 240-250.
http://istasis.com/Before.JPG
before
http://istasis.com/Exhaust.JPG
exhaust
http://istasis.com/Intake.JPG
intake / tune
I just want to thank Edo Performance for their time and dedication. Even though this was the first time that I had ever internally modified a car, Edwin and the rest of the staff were more than helpful in answering my questions and offering advice based on experience. They also made me feel that I was being taken care of and you can't buy that kind of customer service. Like the fact that it was an all-day affair and Edwin would periodically check in with me to make sure that I was doing alright.Â* Another example;Â* I was concerned about the lack of symmetry in the exhausts. When I voiced my concern, Edwin without hesitation offered to straighten them out free of charge, even though it was not apart of his responsibility at all (manufacturer). I will definitely be keeping in contact.
AMS Downpipe
AEM Intake
Ultimate Racing Catback
Works P2 Flash + Tune
http://istasis.com/Dyno.JPG
Sorry for the lack of baseline and the final torque reading was 285lbs. The baseline for both hp and torque should be around 240-250.
http://istasis.com/Before.JPG
before
http://istasis.com/Exhaust.JPG
exhaust
http://istasis.com/Intake.JPG
intake / tune
I just want to thank Edo Performance for their time and dedication. Even though this was the first time that I had ever internally modified a car, Edwin and the rest of the staff were more than helpful in answering my questions and offering advice based on experience. They also made me feel that I was being taken care of and you can't buy that kind of customer service. Like the fact that it was an all-day affair and Edwin would periodically check in with me to make sure that I was doing alright.Â* Another example;Â* I was concerned about the lack of symmetry in the exhausts. When I voiced my concern, Edwin without hesitation offered to straighten them out free of charge, even though it was not apart of his responsibility at all (manufacturer). I will definitely be keeping in contact.