reglaranang
07-13-2009, 05:42 PM
http://www.socalevo.net/gallery/albums/userpics/10892/normal_hp%20and%20tq.jpg
http://www.socalevo.net/gallery/albums/userpics/10892/normal_boost.jpg
http://www.socalevo.net/gallery/albums/userpics/10892/normal_afr.jpg
Did this after MOD at EDO on a Dyno Pak same one as RRE.
316hp and 346tq on 91oct with 24lbs of boost tapering down to 19ish. ETS Intercooler is keeping the knocking down (I had Mike aka Socalredline) check that out for me prior to this baseline.
Titek Exhuast Manifold, Titek 02 Housing, Titek Down Pipe, Invidia Test Pipe, Titek Ti Exhaust, ETS IC and Piping, RC 750, Walbro Fuel Pump, KOYO Radiator,Â* Samco Radiator Piping, Samco Intake Pipe, HKS Filter, Upgraded boost solenoid, STOCK Turbo, Stock Cams.
Tuned by Charlie about 1 and 1/2 years ago. When he tuned me he did not touch the boost which was done by a previous tuner in Norcal.
As I suspected that I have stock clutch slippage around 5000rpm.
I wanted to see what I was making before I install my Kelford Street Cams, new clutch, andÂ* new tune.
Just wanted to put a good word to the Evo owners for EDO Performance.Â* Thanks to Edwin and Logan. If any of you guys are in the HB area pls stop by the shop they also carry or can get JDM Parts. Also the word is that they will be getting 2 tomei turbos next week.
EDO Performance
16182 Gothard St, Unit P, Huntington Beach, CA‎ - (714) 602-5741‎
Want to Thank
Titek
500whp aka Jeff
CSPECÂ*aka Charlie
Folks at EDO
socalredline aka Mike
thisxguy aka RJ
S2myEvo aka Yoshi
macdizzle aka Mac
http://www.socalevo.net/gallery/albums/userpics/10892/normal_boost.jpg
http://www.socalevo.net/gallery/albums/userpics/10892/normal_afr.jpg
Did this after MOD at EDO on a Dyno Pak same one as RRE.
316hp and 346tq on 91oct with 24lbs of boost tapering down to 19ish. ETS Intercooler is keeping the knocking down (I had Mike aka Socalredline) check that out for me prior to this baseline.
Titek Exhuast Manifold, Titek 02 Housing, Titek Down Pipe, Invidia Test Pipe, Titek Ti Exhaust, ETS IC and Piping, RC 750, Walbro Fuel Pump, KOYO Radiator,Â* Samco Radiator Piping, Samco Intake Pipe, HKS Filter, Upgraded boost solenoid, STOCK Turbo, Stock Cams.
Tuned by Charlie about 1 and 1/2 years ago. When he tuned me he did not touch the boost which was done by a previous tuner in Norcal.
As I suspected that I have stock clutch slippage around 5000rpm.
I wanted to see what I was making before I install my Kelford Street Cams, new clutch, andÂ* new tune.
Just wanted to put a good word to the Evo owners for EDO Performance.Â* Thanks to Edwin and Logan. If any of you guys are in the HB area pls stop by the shop they also carry or can get JDM Parts. Also the word is that they will be getting 2 tomei turbos next week.
EDO Performance
16182 Gothard St, Unit P, Huntington Beach, CA‎ - (714) 602-5741‎
Want to Thank
Titek
500whp aka Jeff
CSPECÂ*aka Charlie
Folks at EDO
socalredline aka Mike
thisxguy aka RJ
S2myEvo aka Yoshi
macdizzle aka Mac