MIL.SPEC Christmas Hotness!!!

[[email protected]]

MIL.SPEC has an assortment of products for your Evo:

65mm TB-LOOK AT THIS PIECE OF MECHANICAL PORN:
http://i188.photobucket.com/albums/z230/atlvalet/65TB.jpg

EVERY MIL.SPEC 65mm TB COMES WITH A BRAND NEW OEM GASKET:
http://i188.photobucket.com/albums/z230/atlvalet/gasketlo-res.jpg
"WOT SPECIAL" 65mm Throttle Bodies: No one gives more attention to detail with throttle bodies than MIL.SPEC. All our throttle bodies are rebuilt with MIL.SPEC high pressure throttle body seals. The throttle body shafts are machined, so you'll get additional flow compared to other 65mm units. We have also machined the TB to get rid of that potentially annoying whistle. Also, before they are sent out, every TPS sensor is set to Mistubishi Factory Specs so it's truly a bolt-on unit (some people experience problems without properly calibrated TPS sensors). Finally, every MIL.SPEC 65mm TB is sent out with a new OEM gasket. CORE EXCHANGE REQUIRED.

WHAT MAKES OUR 65mm THROTTLE BODIES DIFFERENT:
• Machined TB shafts for optimized flow
• Machined to eliminate the dreaded 65mm "whistle"
• Rebuilt with MIL.SPEC high pressure shaft seals
• TPS sensor calibrated to :mitsu: Factory Specs
• New :mitsu: BISS Screw
• Includes BRAND NEW OEM gasket machined to 65mm

PRICE: $285 + SHIPPING

65mm TB core deposit is $300-Â* Here are some cost examples:

65mm TB w/core provided = $285 + $11 (USPS Priority) * 1.03 (paypal) = $305.00

65mm TB before receiving core = $285 + $11 (USPS Priority) + $300 (deposit) * 1.03 (paypal) = $614.00


Act quickly, because February 1st throttle bodies will be going up to $295!!!

Reference this thread for more info: http://forums.evolutionm.net/evo-sale-external-engine-power/331371-mil-spec-65mm-throttle-body-hotness.html


MIL.SPEC Throttle Shaft Seals--Eliminate Boost Leaks!!!

Seals are sold in sets of 2 & can be purchased without or with a TB gasket in OEM & 65mm sizes.

Here is the 48 state price structure, including shipping & paypal

$18.12 = 2 Seals
$21.21 = 2 Seals + a new OEM TB Gasket
$24.30 = 2 Seals + a new OEM 65mm TB Gasket

See this thread for more info: http://forums.evolutionm.net/evo-sale-external-engine-power/364108-mil-spec-high-pressure-throttle-shaft-seals-100-cell-cats-available.html

PayPal for TB and TB seals is aby.smfr at gmail.com

Tranny Fluid for 6 speed owners....Castrol Syntorq LT 75W-85

2.5 quartsÂ* $43.99 + $15 S&H.

More info here: http://forums.evolutionm.net/evo-sale-external-engine-power/350220-6-speed-owners-castrol-syntorq-75w-85-full-synthetic-now-available-7.html#post7815046

MIL.SPEC 100 Cell Race Cats

3" and 2.5" avaialble

$179 + FREE Shipping

These new units are 316SS, which has a higher corrosion resistance than 304SS. However, it is more expensive so we can't offer a price reduction...but we've thrown in FREE shipping!!! :)

http://i188.photobucket.com/albums/z230/atlvalet/IMG_0670.jpg


MIL.SPEC Evo 8/9 Bolt on

Normally $299. Now $279 + $10 S&H to locations in SoCal!!!

http://i188.photobucket.com/albums/z230/atlvalet/Bolt-On.jpg


MIL.SPEC Billet Series Rods!!!!

First opportunity to buy. One time price special!!!!

Retail: $1499.00Â* Â* Special One-Time only price: $1349!!!!!!!

http://i188.photobucket.com/albums/z230/atlvalet/Rod_insert_2.jpg

http://i188.photobucket.com/albums/z230/atlvalet/Rod1.jpg

http://i188.photobucket.com/albums/z230/atlvalet/Rod2.jpg

[ccwballer]

those rods are outstanding!

[o-townFLA]

Hi Erik....

[[email protected]]

those rods are outstanding!


Those rods are, in my opinion, superior.

[casperdomo]

Behond superior!!!!

Gawd damn! Looks soooo yummy!

[devsol]

bump! for erik

[jdmitr]

Those are some pretty looking rods and probably look better on a display case as opposed to actually being installed, lol.

[[email protected]]

Those are some pretty looking rods and probably look better on a display case as opposed to actually being installed, lol.


What do you mean by that? They'll look good in any engine and put up with any abuse except for some kind of crazy 1000whp C16 drag car.

[GokuSSJ4]

where are the pistons along with a blue printed OEM or billet crank at ?? common Erik get your stuff together :2funny: I kid.. but it would be nice to see those additional items to go along with the rods..

[[email protected]]

THey're coming Tomas. Piston design is done. Now it's just a matter of waiting for them to get made. Once those are done, it will be crank time :)

[ralliartevoeu]

Those are some pretty looking rods and probably look better on a display case as opposed to actually being installed, lol.


What do you mean by that? They'll look good in any engine and put up with any abuse except for some kind of crazy 1000whp C16 drag car.


Have those connecting rods been tested ?

[[email protected]]

:?


Que?

[[email protected]]

bump

[leaveit2bevo]

Yo eric any advantage of running the TB with a stock intake mani?

[sneakypete]

I got the TB and ported exhaust manifold from you via Reese Tuning and I'm a very satisfied customer. Thank you for quality work.


SP.

[[email protected]]

Yo eric any advantage of running the TB with a stock intake mani?


Yes, but you have to port the IM inlet to 65mm to get the added benefit of the TB.

[Timujin]

^ Want to do this, but I don't want to risk dremeling the stock mani myself. I have nervous hands :buck2:

[leaveit2bevo]

Yo eric any advantage of running the TB with a stock intake mani?


Yes, but you have to port the IM inlet to 65mm to get the added benefit of the TB.


is there by any chance an Aby install and dremel special? :)

[[email protected]]

I know that Tuning Tech (at least at one point) had the adaptor to do this easily.

Any shop should be able to do this relatively easily. Aby has stepped away from doing manual labor on any Evo except for his AFAIK.

[leaveit2bevo]

Would love to buy one check your pms

[[email protected]]

PM returned :)

[GokuSSJ4]

dude I'm getting ready to put together a 2.3L .. I will need a 4g64 crank along with some good pistons and rods... LMK when do you guys plan on making this happen.. hehehe

[[email protected]]

Waiting on pistons to be done. Rods are available now Goku....:D

PM me with your specs and we can get your pistons done :)

[SDevo]

PM me price for the milspec cat with the cel fix. I can pick it up from abby here in sd.