PDA

View Full Version : MSI / DMS Motorsport Adjustable Mounts - PRODUCTION SPECIAL



MSI(Moore-Sport)
02-02-2010, 06:28 AM
These adjustable mounts are desgined specifically for motorsport use, and have become a benchmark for quality and performance in the motor sport community.

Developed with our sister company, DMS North America, these mounts were designed to fill a void in the current marketplace for a competitive, durable suspension mount that can be used in any condition and can be adjusted in a matter of seconds. We have developed these mounts for competition use, so it can be assured that no daily driven street car will ever exploit the limits of this part, and we even offer a lifetime warranty to the original owner (excluding normal wear and tear on the bearing)

http://www.mooresport.com/upload/mnt-3.jpg

Our complete line of top mounts, when possible use a unique locking mechanism that allows quick and easy adjustments that locks in place with one bolt. No longer do parts need to be clamped together. No longer is there a possibility of a “creeping” adjustment. The setting is precise and repeatable while minimizing any failure, deformation or deflection of the mount. If you add one position (hole) of adjustment on one side, this is the same is for the opposite side. No guessing or lining up lines. Count the holes and the settings will be equal. With this concept, it is much less likely that the user will have a situation with stripped threads, or used reference points that are no longer legible. Overall the life expectancy and performance of our machined units far exceeds our competitors mass produced products.

Other models in our wide range of applications include a solid one piece rear design, a two piece plate design that locks in place, or height adjustable models that wind up or down with a locking cap.

http://www.mooresport.com/upload/mnt-2.jpg

We also only produce an open cap for all 4-piece style mounts to allow room for shocks with remote reservoirs, or adjusters at the top to be used.

http://www.mooresport.com/upload/mnt-1.jpg

All models are CNC machined to within .0005” tolerance AFTER material treatments using aircraft grade T6 6065 to offer a controlled distortion against high temperature and extreme impacts.

We chose note to use T7 and 7075 material as hit has proven to be too brittle for motorsport use when a high resistance to impact and shock loads are required. Due to these conditions, often small cracks can develop from constant impacts. This can result in a failure at the worst possible time: during an event.

We have various installation kits to suit all makes and models of vehicles and suspension manufactures. Please simply provide the required thread pitch and spacer required when ordering.

All parts are warrantied for life, even in competition use. Bearings will wear out over time, and are not covered for wear, but failure only (cracking or separation of the ball from the race).

If the demand is there, we will produce a street version similar to the subaru model shown below. This version while still very strong and resistance, is not designed for competition use, but more for daily driven vehicles.
http://www.mooresport.com/upload/mnt-4.jpg

Now, here is the offer. MSI (Moore-Sport) and DMS North America have been selling and manufacturing these mounts for years, and have never given any specials out.
Since this is our first time on the Evolution forums, and our first post of products we manufacture for sale, we will offer all the member here the following:

595$ + trans 450$ + FREE SHIPPING. to the first 10 people:

(please post screen name and order)

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.


If you wish to use the std street bearings in these mounts, you can remove an additional 50$ off the price

We will also produce a batch of street mounts for any interested members as long as we have at least 5 people interested in these.
Price would be 395$ + FREE SHIPPING

1.
2.
3.
4.
5.

Mister
02-04-2010, 11:08 AM
Are these camber adjustable only?

Or is caster also adjustable?

Charlie@MFQ
02-04-2010, 11:09 AM
That's some sick deal on those plates* O0

MSI(Moore-Sport)
02-04-2010, 11:32 AM
You can mount the plates with the holes on the left or right (as opposed to the centered ones). It is not an independent setting, adjusts a small amount of additional caster with the increase in negative camber. It has been our experience that the EVO's do not require as much caster when dialed in for maximum grip. This is not a suby we are talking about here!

MSI(Moore-Sport)
02-08-2010, 07:44 AM
monday bump, PRICE EDITED to 450$ INCLUDING SHIPPING

Evasive EVO
02-11-2010, 03:15 PM
Plates look pretty crazy O0

MSI(Moore-Sport)
02-15-2010, 07:35 AM
Thanks Evasive! May ask what plates you are normally selling to your clients?
-mark