need help removing rear rotors from my IX.......????

[tougewreck2]

i took the brake caliper off and i losened the E-brake but the rotor still wont come off....any input would be great thanks...

[kambodianboi]

You may have to use a rubber hammer and tap it out. Probably ceased up after awhile. Had to do that with my front rotors.

[tougewreck2]

ok thanks man.....

[HMatt]

Yup... hammer... and when you put the new ones back on, smear a little bit of anti-sieze on the hubs so it doesn't happen again. It'll also help keep the insides from rustin...

[tougewreck2]

thanks for the input guys...yeah i was taking my rotors off to put apr extended studs on my car took me all damn!! night pretty much..lol i did all four corners took off the hub and every too....it was a bitch some rust on all corners.....i put anti-seize on the hubs and rotors before i mounted them....wont be doin that anytime soon unless someone pays me then its all good :tickedoff: :2funny:

[reggieting]

Theres 2 holes with threads in it. i used a 12mm bolt along with some wd40 to make it thread properly and they came out fairly easy. If it takes more than 2 hits from my mallet, thats what i do.

[pjb00stin]

Theres 2 holes with threads in it. i used a 12mm bolt along with some wd40 to make it thread properly and they came out fairly easy. If it takes more than 2 hits from my mallet, thats what i do.

+juan.

i think you can use the bolts that hold the exhaust manifold shield on.[same thread patterm]

pj