PDA

View Full Version : COBB 3” FP Turbo Inlet Hose for your FP turbos



HB Speed
06-11-2010, 12:44 PM
The COBB Tuning 3” FP Turbo Inlet Hose is designed for use with Forced Performance 3″ turbo compressor inlets. The bulge design of the COBB Inlet Hose increases the cross-section to 3.5” to maximize air flow delivered directly to your 3″ Forced Performance turbocharger, providing much more efficient power and response. The smooth inner walls of the COBB Turbo Inlet taper gradually at both ends and reduce the air turbulence that occurs in the factory accordion style inlet.
http://blogs.cobbtuning.com/wp-content/uploads/2010/06/COBB3inFPHoseBLBK.jpg
http://blogs.cobbtuning.com/wp-content/uploads/2010/06/3inFPTurboInletInstalled.jpg
The COBB 3” FP Turbo Inlet Hose is constructed using four plies steel-reinforced silicone, eliminating the issue of hose collapse that other inlet pipes suffer while under suction at peak demand. While the steel reinforcement provides excellent stability, the silicone allows adequate torsional flex, allowing engine movement on the OEM engine mounts under hard acceleration without risk of separation.
Price is $115 for either Blue or Black O0