PDA

View Full Version : MIL.SPEC 100 cell Evo 8/9 bolt-on and weld in cats + 65mm Throttle Bodies!!!



11-24-2010, 11:14 AM
Get the highest flowing cat around...the MIL.SPEC 100 cell bolt-on. This sale is a So-Cal member special ONLY!

• Highest flowing cat available
• Full 304SS tubing including cat housing
• 304SS 3/8" flanges
• Comes with gaskets that include fire rings
• 4 M10 bolts and nuts

PRICE: $299 + $20 S&HÂ* $299 SHIPPED!!!


MIL.SPEC weld-in 100 cell cat

This is not an imported Chinese cat. This cat is manufactured in the USA in an ISO/TS 16949:2002 certified facility.

• American made
• 304SS housing
• 3" and 2.5" cats available

PRICE: $179 + $10 S&HÂ* $179 SHIPPED!!!

http://i188.photobucket.com/albums/z230/atlvalet/IMG_0671.jpg


Our cats flow 75% more than the OEM unit and 50% more than an aftermarket ceramic

http://i188.photobucket.com/albums/z230/atlvalet/FlowInfo.jpg



MIL.SPEC 65mm Throttle Body:
http://i188.photobucket.com/albums/z230/atlvalet/65TB.jpg

EVERY MIL.SPEC 65mm TB COMES WITH A BRAND NEW OEM GASKET:
http://i188.photobucket.com/albums/z230/atlvalet/gasketlo-res.jpg

MIL.SPEC 65mm Throttle Bodies: No one gives more attention to detail with throttle bodies than MIL.SPEC. All our throttle bodies are rebuilt with MIL.SPEC high pressure throttle body seals. The throttle body shafts are machined, so you'll get additional flow compared to other 65mm units. We have also machined the TB to get rid of that potentially annoying whistle. Also, before they are sent out, every TPS sensor is set to Mistubishi Factory Specs so it's truly a bolt-on unit (some people experience problems without properly calibrated TPS sensors). Finally, every MIL.SPEC 65mm TB is sent out with a new OEM gasket. CORE EXCHANGE REQUIRED.

PM [email protected] for questions and sales inquiries.

WHAT MAKES OUR 65mm THROTTLE BODIES DIFFERENT:
• Machined TB shafts for optimized flow
• Machined to eliminate the dreaded 65mm "whistle"
• Rebuilt with MIL.SPEC high pressure shaft seals
• TPS sensor calibrated to :mitsu: Factory Specs
• New :mitsu: BISS Screw
• Includes BRAND NEW OEM gasket machined to 65mm

DYNO COMPARE:

http://i188.photobucket.com/albums/z230/atlvalet/TBCompare.jpg

NOTE: THIS IS NOT A TOTALLY ACCURATE COMPARISON, AS THE INTAKE MANIFOLD WAS PORTED. GOING FROM A STOCK TB & IM WILL RESULT IN MORE PRONOUNCED GAINS

65mm TB MSRP: $295

02-26-2011, 03:14 PM
PM's returned!

o-townFLA
02-26-2011, 04:44 PM
Get em while their hot....!

07-15-2011, 12:10 PM
Got a new shipment in bump :D

11-22-2011, 07:14 PM
PM's returned. All items in stock as of yesterday :)

neuspeed
11-25-2011, 09:20 AM
How much extra is the ported IM?

11-28-2011, 01:50 PM
How much extra is the ported IM?


Last time Aby did them, it was $125. But I am not sure if he is currently porting Evo 8/9 manifolds.

You'd have to PM Aby about that. His screen name is WOT

05-29-2012, 12:53 PM
Back in stock :)