how to mod rear bumper bolt so it doesnt rub on the tires

[jgamez06mr]

i got some wider, lower offsetting wheels and lowered my car but now it hits sometimes. pulled my fenders but how do i modify or place the bolt holding up the rear bumper so it will stop rubbing my tires.

[phoreal]

you need to take the bolt and the plastic clip thats there out and cut/grind the mount hole off and relocate the bolt further back and you should be good

[Massimo Power]

Drill a new hole about 2" back and put a new nut and bolt in place.. The remove the original bolts and any clips. Then grind away the small area that's rubbing.

All done.

[phoreal]

^^ he knows all O0

[jgamez06mr]

thanks massimo. O0

[panda]

Just wondering but how wide of a wheel/tire would cause this rubbing to happen?

[evol8]

Just wondering but how wide of a wheel/tire would cause this rubbing to happen?


um a set of 18x9.5 +20 with 255's did it for me, so had to get the tabs removed and relocated

[ryan78]

to the OP, just wanted to know.... what are the sizes/specs of your wheels/tires

[HMatt]

mine hit on hard bumps or small bmps when there are people in the back. My rims are 30 offset 9", and 255/35R18

good to know how to do this though. I'm gonna have to do it before i get my new rubber... does anyone have any pictures of the process?

[raysevo]

he have 18/9.0/+30 but he whats to but a 10mm spacer all arrow so he well be raning +20 all arrow