Tomei Powered: Titanium Intake Pipe

[Jason@Tomei]

http://www.socalevo.net/gallery/albums/userpics/10569/tomei_intake_sticker1.jpg

Hey Guys:

We have some new products coming out for the 4G63 and 4B11 platforms.Â*

This is the all new Titanium Suction Pipe (upper intercooler pipe).Â* Just like our exhaust line, this is made of the same aircraft grade titanium.Â*

-Â* It is 1mm in thickness with
-Â* The OD (outer diameter) of 60.5mm.Â*
-Â* It's 25% lighter then stock (1.54 lbs / 700g)Â* FYI, stock i about 2.04lbs or 950g
-Â* Initial retail will be priced around $290 USD.Â* Please contact your local distributor for special pricing and availability.

http://www.socalevo.net/gallery/albums/userpics/10569/evoxtomeiintake.jpg

[Blaze]

Just got this on my car this afternoon.
(I like)

http://i282.photobucket.com/albums/kk252/BlazeGT4/97ddf315.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/04e33923.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/a4cab0ae.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/0f4c2a5a.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/2098fd55.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/7ab6adf7.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/2f6ea58e.jpg

[GokuSSJ4]

Fking Jason loll.
I want one for my ix
3" intercooler pipe, do it!!!

[Blaze]

I'll pass it along to the engineers and maybe they'll pop a few out.
They bought an awful lot of titanium and they're going a little nutz with it.

;)

[GokuSSJ4]

Short route!!!! Non of that keep your battery oem bs hahahhaha!!!

[Blaze]

Swapped out some parts on the Ralliart.

Courtesy of Tomei Powered.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6506.jpg

New titanium upper IC pipe (evo X specific, but if you've converted your RA intercooler to an Evo, it becomes a direct swap.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6509.jpg

Same size as ARC.Â* The only sig difference is one is titanium and the other was aluminum.
The titanium has better heat soak properties AND a super cool JDM badge.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6513.jpg

Took a few minutes to polish the OEM intercooler pipe.
Free bling.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6515.jpg

Final Install.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6518.jpg

The pip sits very close to the aluminum shroud.Â* So I spent some time tweaking the way the pipe sat.
I opted to run a layer of felt along the bevel of the shroud, just to make sure it doesn't vibrate it's way into contacting the pipe.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6520.jpg