PDA

View Full Version : Tomei Powered: Titanium Intake Pipe



10-20-2010, 05:47 AM
http://www.socalevo.net/gallery/albums/userpics/10569/tomei_intake_sticker1.jpg

Hey Guys:

We have some new products coming out for the 4G63 and 4B11 platforms.*

This is the all new Titanium Suction Pipe (upper intercooler pipe).* Just like our exhaust line, this is made of the same aircraft grade titanium.*

-* It is 1mm in thickness with
-* The OD (outer diameter) of 60.5mm.*
-* It's 25% lighter then stock (1.54 lbs / 700g)* FYI, stock i about 2.04lbs or 950g
-* Initial retail will be priced around $290 USD.* Please contact your local distributor for special pricing and availability.

http://www.socalevo.net/gallery/albums/userpics/10569/evoxtomeiintake.jpg

Blaze
11-04-2010, 05:07 PM
Just got this on my car this afternoon.
(I like)

http://i282.photobucket.com/albums/kk252/BlazeGT4/97ddf315.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/04e33923.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/a4cab0ae.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/0f4c2a5a.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/2098fd55.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/7ab6adf7.jpg
http://i282.photobucket.com/albums/kk252/BlazeGT4/2f6ea58e.jpg

GokuSSJ4
11-14-2010, 10:55 AM
Fking Jason loll.
I want one for my ix
3" intercooler pipe, do it!!!

Blaze
11-14-2010, 06:35 PM
I'll pass it along to the engineers and maybe they'll pop a few out.
They bought an awful lot of titanium and they're going a little nutz with it.

;)

GokuSSJ4
11-15-2010, 11:47 PM
Short route!!!! Non of that keep your battery oem bs hahahhaha!!!

Blaze
10-02-2011, 06:56 PM
Swapped out some parts on the Ralliart.

Courtesy of Tomei Powered.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6506.jpg

New titanium upper IC pipe (evo X specific, but if you've converted your RA intercooler to an Evo, it becomes a direct swap.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6509.jpg

Same size as ARC.* The only sig difference is one is titanium and the other was aluminum.
The titanium has better heat soak properties AND a super cool JDM badge.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6513.jpg

Took a few minutes to polish the OEM intercooler pipe.
Free bling.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6515.jpg

Final Install.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6518.jpg

The pip sits very close to the aluminum shroud.* So I spent some time tweaking the way the pipe sat.
I opted to run a layer of felt along the bevel of the shroud, just to make sure it doesn't vibrate it's way into contacting the pipe.
http://i282.photobucket.com/albums/kk252/BlazeGT4/Ralliart/IMG_6520.jpg