View Full Version : AEM 5 Bar help
Dubs46
12-30-2011, 12:45 AM
Has any one tapped in the aem harness to the stock harness. What colors go with what?
The 5 bar will be replacing my oem map sensor.
Mike W
12-30-2011, 03:43 AM
We have a plug in adapter harness for that. $15 By looking at the connector you should be able to figure ou tthe wiring colors and position.
http://www.roadraceengineering.com/parts/zeitronix/zeit-mapharness-800.jpg
http://www.roadraceengineering.com/parts/zeitronix/zeit-MAP_to_Mitsu_MAP_back.jpg
http://www.roadraceengineering.com/parts/zeitronix/map-mdp_harness-mapside.jpg
http://www.roadraceengineering.com/parts/zeitronix/map-mdp_harness-mdpside.jpg
Mike W
HMatt
12-30-2011, 06:56 AM
Just call and order that harness. It's better not to molest your stock harness if you don't have to.
amaev05
12-30-2011, 07:53 AM
you will also have to modify your ecu flash and evo scan to properly log and use ecu boost. 5 bar wow you must be going big!
HMatt
12-30-2011, 07:59 AM
^Yeah... the whole making it work is my job... and I think it's just what he got a good deal on. lol
Dubs46
12-30-2011, 09:10 AM
Thanks mike and I should of ordered that when I ordered the adapter fml.
& thanks again Harrison :)
HMatt
12-30-2011, 09:22 AM
^Here for you buuuu-dddy!
Dubs46
12-31-2011, 02:03 AM
I molested my harness lol
For anyone else that's going to do this
This is what the oem wires are lol
Yellow Wire - Manifold Differential Pressure Sensor - Pin #73
Black Wire - Sensor Ground - Pin #92
Grey Wire - Power +5volts - Pin #81
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.