AEM 5 Bar help

[Dubs46]

Has any one tapped in the aem harness to the stock harness. What colors go with what?
The 5 bar will be replacing my oem map sensor.

[Mike W]

We have a plug in adapter harness for that. $15 By looking at the connector you should be able to figure ou tthe wiring colors and position.

http://www.roadraceengineering.com/parts/zeitronix/zeit-mapharness-800.jpg

http://www.roadraceengineering.com/parts/zeitronix/zeit-MAP_to_Mitsu_MAP_back.jpg

http://www.roadraceengineering.com/parts/zeitronix/map-mdp_harness-mapside.jpg

http://www.roadraceengineering.com/parts/zeitronix/map-mdp_harness-mdpside.jpg


Mike W

[HMatt]

Just call and order that harness. It's better not to molest your stock harness if you don't have to.

[amaev05]

you will also have to modify your ecu flash and evo scan to properly log and use ecu boost. 5 bar wow you must be going big!

[HMatt]

^Yeah... the whole making it work is my job... and I think it's just what he got a good deal on. lol

[Dubs46]

Thanks mike and I should of ordered that when I ordered the adapter fml.
& thanks again Harrison :)

[HMatt]

^Here for you buuuu-dddy!

[Dubs46]

I molested my harness lol

For anyone else that's going to do this

This is what the oem wires are lol

Yellow Wire - Manifold Differential Pressure Sensor - Pin #73
Black Wire - Sensor Ground - Pin #92
Grey Wire - Power +5volts - Pin #81