PDA

View Full Version : Evo ix Rear crash beam Bolt Size



evojdm2006
10-31-2012, 05:45 PM
hey guys. I want to put my crash beam back on (modified for jdm) but I have lost the bolts. Does anyone know what size the bolts are? or where to buy them (like a link, or dealler...etc)
thanks!

Mike W
10-31-2012, 06:52 PM
8mm x 1.25 is the technical thread diameter and pitch.

It is the same bolt as any 12mm wrench bolt on the whole car. Any hardware store, Mitsu dealership, any dealership that sells cars made after 1978, and especially any shop on So Cal EVO.

If you want to try the Home Depot/Hardware store route, take off any bolt on the car with a 12mm wrench. Try screwing it into the bolt holes in the rear body where you will be bolting on the bumper. It fits. Take that there bolt with you to Home Depot and make sure you buy one that is the same.

Mike W

evojdm2006
10-31-2012, 09:04 PM
thanks a lot Mike! will do