18x10+25

[Marrrden]

In order to clear the front I'd have to get a 25mm spacer. Would that mean I'd have to get spacers all around?

[Mister]

Which model car would help

[Marrrden]

X.

[Mister]

My bad....I just realized you posted in the X section. HAha

With an 18x10 +25 (same size I run) you will not need a spacer, it should clear all your calipers just fine.

What kind of wheels btw?

[Marrrden]

Lol. No biggie.

I'm running on XXR 521s. They're not mounted on yet, but when I did a test fit it only cleared with a 25mm.

[Mister]

Intersting. On my Advan RS-D in size 18x10 +25, it clears all calipers just fine, and rolling fenders isn't necessary.
Must be the spoke design on your wheels causing them to hit the caliper.

See if you can clear the caliper with a 10mm spacer....no sense in running a 25mm unless you really need to.

[Marrrden]

They only clear with 25mm. :/ Is that a problem? That's the reasoning for fender rolling.

What size tires do you have?

[Mister]

im running 265/35-18

[Marrrden]

You think I should be cool at 0 offset?

[Darks17]

Im running 18x10.5 +22/265 35 18 Gram Lights 57DR no spacers, no front rub on anything only fenders rolled were the rears slightly for the Yokohama AD08 tires. I think Mister is right about the pattern of the wheels, and that might be the reason you would need spacers. the smaller spacer the better. :mitsu:

[rcantuc]

here's the same wheel you got with the same spacers you'll need. i think it answers all your questions. definitely aggressive fitment.

http://www.evoxtuning.com/blog/2010/08/09/evo-x-hr-trak-spacers-installation-25mm/

I rent out a fender roller if you want to do the work yourself. it's not that hard to do.

[boostinbyyou]

its doesnt matter on the offset for those wheels...

its the backspacing on the spokes that make the wheel need a spacer...

its very flat on the backside and WILL require a large spacer...

it would be a good idea to use a little spacer in the back...otherwise you will look like a drag honda...lol

thats why i didnt go with those wheels..i got the 527's instead...no spacer needed..