wheels: Gravity Gullflame Gold w/ Polished lip 18x9.5 +15mm
tires: Kumho Ecsta SPT 235-40-18
suspension: Megan Coilovers
fenders: Rolled Rear w/ a Good Amount of Negative Camber
wheels: Gravity Gullflame Gold w/ Polished lip 18x9.5 +15mm
tires: Kumho Ecsta SPT 235-40-18
suspension: Megan Coilovers
fenders: Rolled Rear w/ a Good Amount of Negative Camber
Hey guys, I didnt know where else to post my questions, so I came here since a lot of you have got aftermarket rims...
It would help me tremendously if someone could tell me what offset to get if I want to get 8.5 up front, 9.5 in the rear with 19" wheels.
Also, based on the offsets you guys recommend, what is the WIDEST I can go with tires? I have some tires that are 19/30/265 rear and 19/35/235 front ....can I use them with 19" rims that are 9.5, 8.5 and whatever offset ??
Thanks, this will really help me and two friends who want this answered as well.Â* I figure you guys would know on here.Â* Thanks a lot!
if you're refering to the g35, the offset in the rear depends on the style/shape of the rim...typically offsets range from +22 - +25 for the rears, and to my knowledge you can fit 275 tires on 9.5 without rolling fenders...in the front, you're looking for high 30's low 40's offsets again, depending the shape/style of the rim and can squeeze up to 255 tires there.Originally Posted by philthyevo
hope that helps.
no one on this forum knows how to spell.
Wheels: AME Circular SPEC-R Matte black 18x9 +35 offset
Tires: Falken FK452 245 40 18
Suspension: swift spring stock MR shocks Muellerized stage 1
Fenders rolling: not needed
It is better to listen and appear stupid than to open your mouth and remove all doubt
Wheels: JIC J-Force 7Â*
Specs: 18x8.5 +25 Offset
Tires: Falken FK-452 255/35R18
Suspension: Swift
Fenders Rolled: Rolled
I have a question:
What are the largest 17 inch wheels I could fit on the Evo without having to put a wide body kit on.
Also, what modifications will need to be done?
(Tuning Technologies Dyno Tuned) Perrin IC / Nisei LICP / AEM short ram / AEM dry filter / AEM EBG A-pillar setup / Dejon MBC / Invidia catback / no name resonated cat delete / TTech downpipe / Walbro fuel pump / ACT Xtreme PressureÂ* Street Clutch w/ ACT Prolite flywheel / Speed Source EVO 2pc Stiff Bushings Kit / 8pc Stiff Shifter Bushings Kit Metal
17x10 5zigens/ 275 tires.Originally Posted by LiquidLife
look up early pics of "bayareaevo"s car on evom. rolled front and rear fenders on coilovers.
no one on this forum knows how to spell.
wheels: 18x9.5 +22mm AME TM-02
tires: 245/40/18 Falken RT-615
suspension: Espelir, spaced front
fenders: CUT YOUR REARS!
Got these from Francis at Aspec.
-Derek
RE30's 18X9 35 offset
Tanabe Springs
No fender rolling
volk ce28
18x9.5 @ 28 offset
kw variant 3, aggressive street alignment settings
Rolled rears
DYNAMIC AUTOSPORTS<br />TUNING TECHNOLOGIES<br />DRIVELINE SALES<br />WEST END ALIGNMENT<br />FUJI AUTO
Quick question could i run ssr sp1 in 17x9 with super low wheel disk in +11 offset or 17x9 with hyper wheel disk in -19 offset?willing pull roll & use spacers
your sig is too large.<br />please reduce it&#039;s size.
18x9.5 +28 front /+34 on rear on 265-35-18
ANYTHING MORE THAN A IX , IS UN-ACCEPTABLE !!!! "MEANING X'S SUCK "
thanks! helped alot!
UPDATE
Wheels: 18x9.5 +40 Enkei NOT3-M
Tires: 255/35/18 Falken 452
Suspension: RobiSpec springs(1" drop), 20mm spacers in front, 3mm in rear (needs a 5mm at least)
Fenders: Fronts Evodave mod, rears rolled
C-SPEC TUNED E85/91, FP Black, ETS equal length mani, Built 2.3L, Eagle crank, Eagle rods, Wiseco pistons, Balance shaft delete, ACL race bearings, Cosworth M2s, Cosworth HRPM valve springs, Supertech 1mm over valves, My Race ported head, Spoolinup COP, FIC2150cc, Double pumper, AEM intake, Hallman boost, MILSPEC 65mm TB, My Ported intake mani, Buschur O2 housing, Invidia dp, RRE rally cat, Apexi Worldsport 2, Buschur intercooler, ETS UICP, WeaponR LICP, Synapse DV, ECT..
Is it bad to bump this old ass thread in hopes of seeing some more kick ass wheel setups ?
...Im sorry
<a href="http://www.thecraigbennett.com/"><img src="http://www.thecraigbennett.com/docs/hosted_images/steve-meade-sig-banner.jpg" alt="" height="60" border="0" width="468"></a>
bump for wheel setups
Anyone know if the following can be done with NO spacers and NO rolling on STOCK MR Bilstein suspension:
17x9.5 +15
275/40/17
??????
do it
NOS is like a girl with a std, you want to hit it but your afraid of the consequences<br /><br />[quote author=blaze-619 link=topic=108212.msg8137152#msg8137152 date=1302116871]<br />Can't fuck with an angel.<br />[/quote]<br />[quote author=phoreal link=topic=108212.msg8137157#msg8137157 date=1302117146]<br />i fucked a stripper named angel <br />[/quote]<br />[quote author=pureIX link=topic=108212.msg8137163#msg8137163 date=1302117399]<br />lol, win<br />[/quote]
^^^ you can try...and you'll regret not going widebody.
no one on this forum knows how to spell.