flywheel

[scumbee]

i cannot belive itÂ* :'(...i got sooo far on doing my clutch job and the only thing thats holding me back is the 7 nuts holding the flywheelÂ* :'(
one was able 2 get out 6 more 2 go these guys are on pretty damn goodÂ* >

[dastallion951]

use an impact gun n if that dont work some pb blaster and an impact gun, and if that dont work a stronger impact gun lol........sorry but theyll come out

[scumbee]

raaaaaaaaaaaaaa
i cant belive thatÂ* i cant get them out!!!!!!!!!!!!!!!!!!!!!!!!
i kinda screw up 2 bolts already :'(
and im also using a breaker bar and still no luck....the whole damn engine moves minus the flywheel bolts >...sooo where do i get this pb blaster ???????

[VinceR]

definitley use an impact gun, your just going to mess up the rest of the bolts if your going to do it with a breaker bar...

[scumbee]

i tried using a 90psi one but no luck

[turbolarry]

Get a flywheel wrench or any piece of metal you can bend and drill. This is on a DSM, but the idea is the same; one bolt in the flywheel and one bolt in the block...

[scumbee]

yeah thats what im using

Get a flywheel wrench or any piece of metal you can bend and drill. This is on a DSM, but the idea is the same; one bolt in the flywheel and one bolt in the block...

yeah thats what im doing....but he damn bolts wont even move:[...the whole damn engine moves but the bolts >..like i said i was just able 2 take off one

[dastallion951]

a 90 psi impact wont do the trick scumbee those bolts have at least a 100 lb/ft of torque to the bolts...use pb blaster spray a shit load on the flywheel dont worry about it gettin on there cuz im hopin ur gonna replace the flywheel or have it sent to be resurfaced.

[scumbee]

soo what is this pb blaster??? is that whats its called ????

[dastallion951]

its designed to help loosen up bolts that are seized in there....primarily used for those stuck exhaust bolts but does a much better job then wd-40...u can find it at any auto parts store....its a yellow and white and black can...says PB Blaster on the front best stuff to have in any toolbox imo got 2 cans in mine haha

[scumbee]

well thanx for the info :)
ima buy me some ....but i still cant belive that these lil phucks are the only thing thats holding me back :'(

[VIGIL_IX]

its designed to help loosen up bolts that are seized in there....primarily used for those stuck exhaust bolts but does a much better job then wd-40...u can find it at any auto parts store....its a yellow and white and black can...says PB Blaster on the front best stuff to have in any toolbox imo got 2 cans in mine haha

+1 pd blaster works wonders on seized up bolts!

GL with the rest of the clutch job

[scumbee]

pb blaster didnt do much..i used a electrical impact gun also no luck :'(

[dastallion951]

ur sure ur goin the loose way with the impact.....??? dont use an electrical one use one with an air compressor....

[scumbee]

the bolts are off :D
a mechanic used his snap on impact gun and they came out all fast :]

[dastallion951]

yup i told u scum u need a good impact to take those bolts off pb blaster work for u ?

[scumbee]

yup i told u scum u need a good impact to take those bolts off pb blaster work for u ?

hmmm not really sure i used everything lol......sooo does any know where i can find a diagram for the tranny????
i cant remember where all the bolts go in

[riceball777]

Iimpact gun is the only way to go with the flywheel bolts

[scumbee]

ooh ive been done :D