-
Evo ix Rear crash beam Bolt Size
hey guys. I want to put my crash beam back on (modified for jdm) but I have lost the bolts. Does anyone know what size the bolts are? or where to buy them (like a link, or dealler...etc)
thanks!
-
SoCalEvo.net Shop
Re: Evo ix Rear crash beam Bolt Size
8mm x 1.25 is the technical thread diameter and pitch.
It is the same bolt as any 12mm wrench bolt on the whole car. Any hardware store, Mitsu dealership, any dealership that sells cars made after 1978, and especially any shop on So Cal EVO.
If you want to try the Home Depot/Hardware store route, take off any bolt on the car with a 12mm wrench. Try screwing it into the bolt holes in the rear body where you will be bolting on the bumper. It fits. Take that there bolt with you to Home Depot and make sure you buy one that is the same.
Mike W
-
Re: Evo ix Rear crash beam Bolt Size
thanks a lot Mike! will do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules