mivec cam noise

[subliminal]

I replaced the timing belt along with the timing tensioner turns on fine idles fine but if you Rev it up till the mivec engages it sounds like there's something loose and it's coming from the intake cam
Just did the oil change 3 weeks ago with motul 5 30
Checked the oil and it's good
Has 115000 miles

[kambodianboi]

So at 3500rpm it sounds funny? I recall my evo always sounding funny at all sorts of RPM lol

[subliminal]

Meaning something is rattling it's abnormal sounds like maybe there's not enough oil

[kambodianboi]

Did you do the timing belt replacement?

[one4]

Did u do the balance shaft as well?

[subliminal]

Balance shafts was done aswell

[KT Motoring]

I replaced the timing belt along with the timing tensioner turns on fine idles fine but if you Rev it up till the mivec engages it sounds like there's something loose and it's coming from the intake cam
Just did the oil change 3 weeks ago with motul 5 30
Checked the oil and it's good
Has 115000 miles

your balance shaft pulley is out of phase

[subliminal]

Found what it might be... Connected the scanner says timing is advanced so it gave me cam position sensor code
Not saying it is the cam sensor just saying my intake cam gear is ahead on timing
Car went it limp mode and from then on had a hard time starting I'm going to readjust the timing and go from there

[subliminal]

Problem solved timing was advanced put it back to place and now she is purring and reving like before thanks for the input