Anyone going to be there this Sunday or showing their car? I think I'm going to head over to shoot stuff and wanted to shoot some Socal Evo members as well.
https://www.facebook.com/events/136697350260351/
Anyone going to be there this Sunday or showing their car? I think I'm going to head over to shoot stuff and wanted to shoot some Socal Evo members as well.
https://www.facebook.com/events/136697350260351/
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
theres still socal evo members that have evos?
I was there for a little bit. But man it got hot pretty fast and we couldnt stay long.
Sportback Evolution MR
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
my cars down as well so i didnt get to go
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
I decided to keep my 9 rear, but I will have the full 7 front and wing. Thanks, I can't wait until it's all done too, feels like it has taken forever.
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
Mine has been at the body shop about 3 weeks now, but this year it has been down a lot in general as I've been having little things sorted and also chasing down oiling issues with my turbo.
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
Haha yes... it's a FP Red dual bb with the MHI housing. I didn't have issues with it until I went to e85 on a built motor. I think there's just a ton more crank case pressure so the oil return rate is likely impeded with only using the stock valve cover vents.
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com
All the ball bearing FP turbos that use the MHI housing and the older CHRA are prone to pushing oil past the seals. It needs to be addressed by making sure you have a restricted oil feed to the turbo and then making sure there is nothing impeding the flow of the return line and that crank case pressures are under 0.25psi, which in my opinion is extremely low. That's why most guys running the Red or Black have to resort to increasing the vent sizes on the valve cover massively.
Are the newer stainless Reds coming with the billet center? I don't know anyone personally running one yet, so I'm not sure if they are as sensitive to the things mine is.
Art is never finished, only abandoned - Leonardo da Vinci
My Instagram - https://instagram.com/seven10
Evo Instagram - https://instagram.com/lhdevo7
Chouseki Lab - https://chousekilab.com